Versión actual por:
mike
Texto:
| Hi Bryn, |
---|
| |
---|
| Have you tried connecting it to an external monitor or TV? |
---|
| |
---|
| If that works then loose cable to screen or defective screen. |
---|
| |
---|
| That model is from 2011. Remove the CMOS again but this time replace it as it is probably not holding it charge. |
---|
| |
---|
- | When you do get it going agian, this time, update the BIOS. Should be v1.80. |
---|
+ | When you do get it going agian, this time, update the BIOS. Should be v6.20. |
---|
+ | |
---|
+ | https://support.dynabook.com/support/viewContentDetail?contentId=3569999 |
---|
+ | |
---|
+ | It can be updated from Windows or use Rufus v3.11 to make a bootable USB flash drive from the “iso” file. |
---|
| |
---|
| Hope this helps! |
---|
Estatus:
open
Editado por:
mike
Texto:
| Hi Bryn, |
---|
| |
---|
| Have you tried connecting it to an external monitor or TV? |
---|
| |
---|
| If that works then loose cable to screen or defective screen. |
---|
+ | |
---|
+ | That model is from 2011. Remove the CMOS again but this time replace it as it is probably not holding it charge. |
---|
+ | |
---|
+ | When you do get it going agian, this time, update the BIOS. Should be v1.80. |
---|
+ | |
---|
+ | Hope this helps! |
---|
Estatus:
open
Aporte original por:
mike
Texto:
Hi Bryn,
Have you tried connecting it to an external monitor or TV?
If that works then loose cable to screen or defective screen.
Estatus:
open