Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Aporte original por: ifixsmartphone ,

Texto:

I usually use hairdryer to soften the adhesive when removing digitizer from LCD on smartphone, and I see use a Heat Gun to remove this.

As questioned above, I am afraid the heat may cause the damage to LCD, isn't hair dryer good enough?

I want to know if LCD is safe with 500degree heatgun when removing the glass.  I am sure you will have to heat this over 1 min on each side.

Estatus:

open