Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Ayuda

Aporte original por: reims.andrade ,

Texto:

Dear the oxygen sensor must be fully operational. [br]

to calibrate you have to connect a patient circuit with flow sensor. First you have to obstruct  the inlet air flow ( if you do not have the correct part, close with a adhesive tape all the hole) and wait until the message to unblock the inlet.

so after waiting for finish process.

any doubt contact me at eric@comprehense.com.br

Estatus:

open