Saltar al contenido principal

Aporte original por: Max ,


When you push the start button do any lights flash?

If the clean light flashes seven times you have a heater error and the board is locked out.  You will have to diagnose whether the problem is the board, heater, tco ot thermister.

If a light above a button flashes quickly it means that button is stuck and the console with UI needs to be replaced.

If there is no response whatsoever from the unit when the start button is pressed chances are the console with the UI needs to be replaced.

You can use the model number to find the part on any number of sites. If you replace the console I would strongly recommend replacing the board thermal fuse as well, it tends to go out a few days after touching the wires in the control area.