Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Aporte original por: jay ,

Texto:

first thing double check the battery has been put in the right way round, honestly so many people put it back wrong. Check the buttons on the circuit board aren’t damaged or falling off and no signs of water damage.

This works with the generation before you car defiantly and may work for yours if it needs reprogramming, fingers crossed it works for you.

1.    Switch ignition '''ON'''.

2.    Within '''4''' seconds press the '''LOCK''' or '''UNLOCK''' button of the first remote transmitter.

3.    Within '''4''' seconds switch ignition '''OFF'''.

4.    Within '''4''' seconds switch ignition '''ON'''.

5.    Within '''4''' seconds press the '''LOCK''' or '''UNLOCK''' button of the first remote transmitter.

6.    Within '''4''' seconds switch ignition '''OFF'''.

7.    Within '''4''' seconds switch ignition '''ON'''.

8.    Within '''4''' seconds press the '''LOCK''' or '''UNLOCK''' button of the first remote transmitter.

9.    Within '''4''' seconds switch ignition '''OFF'''.

10. Within '''4''' seconds switch ignition '''ON'''.

11. Within '''4''' seconds press the '''LOCK''' or '''UNLOCK''' button on the first remote transmitter.

12.  The doors will '''LOCK''' and '''UNLOCK''' once.

13.  Press the '''LOCK''' or '''UNLOCK''' on all additional remote transmitters to be programmed.

14.  The doors will '''LOCK''' and '''UNLOCK''' for each remote transmitter programmed.

15.  Switch ignition '''OFF'''.

16.  Check operation of all remote transmitters.

Estatus:

open