Saltar al contenido principal
Ayuda

Versión actual por: oldturkey03 ,

Texto:

Wifi range when affected during a repair or upgraded glass is usually because the wire is disturbed (not tightly connected to the mainboard) or the wire is pinched or broken. The iPhone and iPod usually have a small black wire floating around inside that connects to the board and then runs to another antennae location. Make sure not to disconnect the wire and make sure to reconnect it fully. The connection can be a round ring of metal with the receive wire coming through a tiny pin in the center. If the center pin is not seated all the way back into the connection it will not transmit conrrectly.
-
-I found spitfiremods.com to be a very techinical company in the states with someone always available to call for help whether you bought something from them or just have technical questions.

Estatus:

open

Aporte original por: Todd R ,

Texto:

Wifi range when affected during a repair or upgraded glass is usually because the wire is disturbed (not tightly connected to the mainboard) or the wire is pinched or broken.  The iPhone and iPod usually have a small black wire floating around inside that connects to the board and then runs to another antennae location.  Make sure not to disconnect the wire and make sure to reconnect it fully.  The connection can be a round ring of metal with the receive wire coming through a tiny pin in the center.  If the center pin is not seated all the way back into the connection it will not transmit conrrectly.

I found spitfiremods.com to be a very techinical company in the states with someone always available to call for help whether you bought something from them or just have technical questions.

Estatus:

open