Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Aporte original por: John Nguyen ,

Título:

Trouble removing charge flex cable

Texto:

Hi, i’m having a difficult time removing the charge flex cable that is soldered to the board. I’ve watched several videos but always end up ripping the pads off the flex cable when trying this on a couple broken ipod boards i have. I’ve tried using my cheap hot rework station set to 250c and also soldering iron and adding flux then using wick to remove the solder but still can never get the soldered pads to lift off the board without ripping.

Dispositivo:

iPod Touch 5th Generation

Estatus:

open