Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Versión actual por: Isaac ,

Texto:

It could be a fan issue, an issue with the fan controller on the board, an issue with the temperature sensors, or even a strange issue with software. On the software side, I have only ever seen that with video cards that let you control the fan speed from the driver.
 
Try something likeEDIT: Removing OpenHardwareMonitor and check that the temps are not jumping around when they should be hot-running. This can helpsuggestion. Saw in second video you detecthave a faulty sensor. You can also get the RPM of the fans from OHMmonitor going.
Try something likeEDIT: Removing OpenHardwareMonitor and check that the temps are not jumping around when they should be hot-running. This can helpsuggestion. Saw in second video you detecthave a faulty sensor. You can also get the RPM of the fans from OHMmonitor going.

Estatus:

open

Aporte original por: Isaac ,

Texto:

It could be a fan issue, an issue with the fan controller on the board, an issue with the temperature sensors, or even a strange issue with software.  On the software side, I have only ever seen that with video cards that let you control the fan speed from the driver.

Try something like OpenHardwareMonitor and check that the temps are not jumping around when they should be hot-running.  This can help you detect a faulty sensor.  You can also get the RPM of the fans from OHM.

Estatus:

open