Saltar al contenido principal
Ayuda

Versión actual por: Umair Khan ,

Texto:

-Once you have all the screws out from the back you want wack the panel from the bottom towards the trip of the tv. Essentially there are fixed screws that the back panel is resting on like a picture rests on a screw in the wall. So you want to push it up on the same plane as the tv panel. If you force the back away from the tv you well break those snaps.
+Once you have all the screws out from the back you want to wack the panel from the bottom towards the top of the tv. Essentially there are fixed screws that the back panel is resting on like a picture rests on a screw in the wall. So you want to push it up in the same plane as the tv panel. If you force the back away from the tv you will break those snaps. There are around 4 or 5 screws across the you inside the cover so it can take a lot of controlled force to knock the panel off the screws.

Estatus:

open

Aporte original por: Umair Khan ,

Texto:

Once you have all the screws out from the back you want wack the panel from the bottom towards the trip of the tv.  Essentially there are fixed screws that the back panel is resting on like a picture rests on a screw in the wall. So you want to push it up on the same plane as the tv panel. If you force the back away from the tv you well break those snaps.

Estatus:

open