Saltar al contenido principal
Ayuda

Versión actual por: tr121 ,

Título:

Logic Board compatability question

Texto:

Did not specify a device here because there are two in question. Let’s call them Computer A and Computer B for short.

'''Computer A''': MacBook Pro 15" Unibody Mid 2009

'''Computer B:''' MacBook Pro 15" Unibody Late 2011

Computer A’s exterior casing is really beat up and there are multiple gashes near the ports, including a moderate dent in the top left corner. Computer B’s exterior casing is in almost perfect condition. No dents, no scratching whatsoever. However, it is missing parts and the MLB is toast.

My question here is would I be able to transfer the internals from Computer A into the top case assembly of Computer B? Or is this simply not possible?

[guide|7518]

[guide|1729]

Looking at these two guides here it looks like the standoffs for the logic board are in the same spots. Any ideas if this would work?

Thanks!

Dispositivo:

MacBook Pro 15" Unibody

Estatus:

open

Respuesta Aceptada:

+583781

Aporte original por: tr121 ,

Título:

Logic Board compatability question

Texto:

Did not specify a device here because there are two in question. Let’s call them Computer A and Computer B for short.

'''Computer A''': MacBook Pro 15" Unibody Mid 2009

'''Computer B:''' MacBook Pro 15" Unibody Late 2011

Computer A’s exterior casing is really beat up and there are multiple gashes near the ports, including a moderate dent in the top left corner. Computer B’s exterior casing is in almost perfect condition. No dents, no scratching whatsoever. However, it is missing parts and the MLB is toast.

My question here is would I be able to transfer the internals from Computer A into the top case assembly of Computer B? Or is this simply not possible?

[guide|7518]

[guide|1729]

Looking at these two guides here it looks like the standoffs for the logic board are in the same spots. Any ideas if this would work?

Thanks!

Dispositivo:

MacBook Pro 15" Unibody

Estatus:

open