Saltar al contenido principal
Ayuda

Versión actual por: Amin Jun ,

Texto:

Hey guys,
I have a Macbook Pro late 2011. I had replaced the hard drive and the cable and I still could not figure out why it is not working. I also had restarted SMC so I thought the problem was with the logic board. But, after reading thread I realized that I needed to restart '''nvram''' as well. I still don’t know if my old hdd/cable would work or not. Anyway, thanks for such a great thread.[br]
+
+
[br]
+
+
PS: This was a helpful link btw on how to reset nvram and SMC.
https://iosafe.com/helpdesk/kb/faq.php?id=14
+
+
+
+
+
+
+
+================================[br]
+Update: [br]
+I still have problems. After I restart nvram, it recognizes the hard drive, but after 5 minutes, it forgets it. Any clues why?

Estatus:

open

Editado por: Amin Jun ,

Texto:

-Hey guys, [br]
+Hey guys,
+I have a Macbook Pro late 2011. I had replaced the hard drive and the cable and I still could not figure out why it is not working. I also had restarted SMC so I thought the problem was with the logic board. But, after reading thread I realized that I needed to restart '''nvram''' as well. I still don’t know if my old hdd/cable would work or not. Anyway, thanks for such a great thread.[br]
[br]
+PS: This was a helpful link btw on how to reset nvram and SMC.
-I have a Macbook Pro late 2011. I had replaced the hard drive and the cable and I still could not figure out why it is not working. I also had restarted SMC so I thought the problem was with the logic board. But, after reading thread I realized that I needed to restart '''nvram''' as well. I still don’t know if my old hdd/cable would work or not. Anyway, thanks for such a great thread.
+https://iosafe.com/helpdesk/kb/faq.php?id=14

Estatus:

open

Aporte original por: Amin Jun ,

Texto:

Hey guys, [br]

[br]

I have a  Macbook Pro late 2011. I had replaced the hard drive and the cable and I still could not figure out why it is not working. I also had restarted SMC so I thought the problem was with the logic board. But, after reading thread I realized that I needed to restart '''nvram''' as well. I still don’t know if my old hdd/cable would work or not. Anyway, thanks for such a great thread.

Estatus:

open