Saltar al contenido principal
Ayuda

Versión actual por: Hector Hind ,

Texto:

In Situation #2 did you use the screen from the first XS rear glass repair ?
Either way to me it does sound like you just damaged the FPC connector/cable upon removal.
Next one you get for lcd repair make sure to test the touch before removal then test again each step of the way ie pry up the lcd and undo the shields, disconnect the battery then reconnect it and test is touch still working ? ok great next disconnect battery and lcd connectors , reconnect, retest, remove again, place aftermarket one on and test , disconnect , reconnect original lcd and test ect ect
Process of elimination will lead us to the answer here :)
+
+=== Update (05/15/2019) ===
+Interesting , i must say i’ve only had them in for lcd replacement so havnt’t looked into this much . the next one to come through my store i’ll be sure to test and report back.

Estatus:

open

Aporte original por: Hector Hind ,

Texto:

In Situation #2 did you use the screen from the first XS rear glass repair ?

Either way to me it does sound like you just damaged the FPC connector/cable upon removal.

Next one you get for lcd repair make sure to test the touch before removal then test again each step of the way ie pry up the lcd and undo the shields, disconnect the battery then reconnect it and test is touch still working ? ok great next disconnect battery and lcd connectors , reconnect, retest, remove again, place aftermarket one on and test , disconnect , reconnect original lcd and test ect ect

Process of elimination will lead us to the answer here :)

Estatus:

open