Saltar al contenido principal
Ayuda

Versión actual por: zack ,

Título:

Battery side pinout or schematic pleease...

Texto:

So the flex cable that the battery uses to plug into the ipad ripped off of the battery side. The part that plugs into the 4 slotted plug is good but cant figure out what solder points on the protection board on the battery are the temp and other signal wire. I have figured out which ones are the +\- but have yet to find any publications regarding the battery protection circuitry layout/ schematic or anything about the physical battery and not the ipad circuitry which is easily found. In the schematic for the entire ipad itself has the battery connector side information on the ipad side but says nothing about thr actual battery itself.. . Please help!! :)
 
[image|1728521]
 
=== Update (04/08/2019) ===
[image|1730075]
 
[image|1730076]

Dispositivo:

iPad Mini GSM

Estatus:

open

Respuesta Aceptada:

559992

Editado por: zack ,

Título:

Battery side pinout or schematic pleease...

Texto:

So the flex cable that the battery uses to plug into the ipad ripped off of the battery side.  The part that plugs into the 4 slotted plug is good but cant figure out what solder points on the protection board on the battery are the temp and other signal wire.  I have figured out which ones are the +\- but have yet to find any publications regarding the battery protection circuitry layout/ schematic or anything about the physical battery and not the ipad circuitry which is easily found.  In the schematic for the entire ipad itself has the battery connector side information on the ipad side but says nothing about thr actual battery itself..  .  Please help!!  :)

[image|1728521]

Dispositivo:

iPad Mini GSM

Estatus:

open

Respuesta Aceptada:

559992

Aporte original por: zack ,

Título:

Battery side pinout or schematic pleease...

Texto:

So the flex cable that the battery uses to plug into the ipad ripped off of the battery side.  The part that plugs into the 4 slotted plug is good but cant figure out what solder points on the protection board on the battery are the temp and other signal wire.  I have figured out which ones are the +\- but have yet to find any publications regarding the battery protection circuitry layout/ schematic or anything about the physical battery and not the ipad circuitry which is easily found.  In the schematic for the entire ipad itself has the battery connector side information on the ipad side but says nothing about thr actual battery itself..  .  Please help!!  :)

[image|1728521]

Dispositivo:

iPad Mini GSM

Estatus:

open