Saltar al contenido principal
Ayuda

Versión actual por: Arthur Shi ,

Texto:

Hi James,
 
I would first check the display connectors, disconnecting them, making sure there are no particulates on the connectors, and reseating them. I would also check on the screw tightness of the logic board screws in step 17 of this step:[br]guide:[br]
I would first check the display connectors, disconnecting them, making sure there are no particulates on the connectors, and reseating them. I would also check on the screw tightness of the logic board screws in step 17 of this step:[br]guide:[br]
 
[guide|61314|stepid=52984]

Estatus:

open

Aporte original por: Arthur Shi ,

Texto:

Hi James,

I would first check the display connectors, disconnecting them, making sure there are no particulates on the connectors, and reseating them. I would also check on the screw tightness of the logic board screws in this step:[br]

[guide|61314|stepid=52984]

Estatus:

open