Saltar al contenido principal
Ayuda

Versión actual por: jayeff ,

Texto:

Hi,
 
Here’s a [http://brotherprintersupportnumber.strikingly.com/blog/how-to-replace-the-ink-absorber-on-a-brother-printer|link] that describes how to replace the ink absorber in a Brother printer.
 
If it doesn’t reset after replacing the inkpad, here’s a link to a [https://www.youtube.com/watch?v=KecsLk0wUN8|video] that shows how to reset the purge counter for your printer. This should allow you to at least keep on printing.
 
=== Update (01/19/2019) ===
Hi,
 
Here’s a [https://www.edvdrucker.de/Downloads/Explosionszeichnungen/Brother/Brother-DCP-J125-J315-J515-J715-Ersatzteile.pdf|link] showing the parts of your printer.
 
On p.12 you’ll find the part numbers relating to the ink absorber parts. (see below)
 
2 LS4699001 LS4699001 INK ABSORBER FELT (INK ABSORBER BOX LOWER)
2 LS4699001 LS4699001 INK ABSORBER FELT (INK ABSORBER BOX LOWER)
 
3 LS5136001 LS5136001 INK ABSORBER FELT (MAINTENANCE UNIT)
3 LS5136001 LS5136001 INK ABSORBER FELT (MAINTENANCE UNIT)
 
4 LS6842001 LS6842001 INK ABSORBER TUBE ASSY (SP)
4 LS6842001 LS6842001 INK ABSORBER TUBE ASSY (SP)
 
If you search online by typing the part number '''''only''''' in the search box of your browser you’ll get results for suppliers of the part. A lot say “not in stock” but a few have them (only checked part #2 ;-)

Estado:

open

Editado por: jayeff ,

Texto:

Hi,
 
Here’s a [http://brotherprintersupportnumber.strikingly.com/blog/how-to-replace-the-ink-absorber-on-a-brother-printer|link] that describes how to replace the ink absorber in a Brother printer.
 
If it doesn’t reset after replacing the inkpad, here’s a link to a [https://www.youtube.com/watch?v=KecsLk0wUN8|video] that shows how to reset the purge counter for your printer. This should allow you to at least keep on printing.
 
=== Update (01/19/2019) ===
Hi,
 
Here’s a [[https://www.edvdrucker.de/Downloads/Explosionszeichnungen/Brother/Brother-DCP-J125-J315-J515-J715-Ersatzteile.pdf|https://www.edvdrucker.de/Downloads/Explosionszeichnungen/Brother/Brother-DCP-J125-J315-J515-J715-Ersatzteile.pdf]|linkhttps://www.edvdrucker.de/Downloads/Explosionszeichnungen/Brother/Brother-DCP-J125-J315-J515-J715-Ersatzteile.pdf|link] showing the parts of your printer.
Here’s a [[https://www.edvdrucker.de/Downloads/Explosionszeichnungen/Brother/Brother-DCP-J125-J315-J515-J715-Ersatzteile.pdf|https://www.edvdrucker.de/Downloads/Explosionszeichnungen/Brother/Brother-DCP-J125-J315-J515-J715-Ersatzteile.pdf]|linkhttps://www.edvdrucker.de/Downloads/Explosionszeichnungen/Brother/Brother-DCP-J125-J315-J515-J715-Ersatzteile.pdf|link] showing the parts of your printer.
 
On p.12 you’ll find the part numbers relating to the ink absorber parts. (see below)
 
2 LS4699001 INK ABSORBER FELT (INK ABSORBER BOX LOWER)
 
3 LS5136001 INK ABSORBER FELT (MAINTENANCE UNIT)
 
4 LS6842001 INK ABSORBER TUBE ASSY (SP)
 
If you search online by typing the part number '''''only''''' in the search box of your browser you’ll get results for suppliers of the part. A lot say “not in stock” but a few have them (only checked part #2 ;-)

Estado:

open

Editado por: jayeff ,

Texto:

Hi,
 
Here’s a [http://brotherprintersupportnumber.strikingly.com/blog/how-to-replace-the-ink-absorber-on-a-brother-printer|link] that describes how to replace the ink absorber in a Brother printer.
 
If it doesn’t reset after replacing the inkpad, here’s a link to a [https://www.youtube.com/watch?v=KecsLk0wUN8|video] that shows how to reset the purge counter for your printer. This should allow you to at least keep on printing.
 
=== Update (01/19/2019) ===
Hi,
 
Here’s a [[https://www.edvdrucker.de/Downloads/Explosionszeichnungen/Brother/Brother-DCP-J125-J315-J515-J715-Ersatzteile.pdf|https://www.edvdrucker.de/Downloads/Explosionszeichnungen/Brother/Brother-DCP-J125-J315-J515-J715-Ersatzteile.pdf]|link] showing the parts of your printer.
 
On p.12 you’ll find the part numbers relating to the ink absorber parts. (see below)
 
2 LS4699001 INK ABSORBER FELT (INK ABSORBER BOX LOWER)
 
3 LS5136001 INK ABSORBER FELT (MAINTENANCE UNIT)
 
4 LS6842001 INK ABSORBER TUBE ASSY (SP)
 
If you search online by typing the part number '''''only''''' in the search box of your browser you’ll get results for suppliers of the part. A lot say “not in stock” but a few have them (only checked part #2 ;-)

Estado:

open

Original post by: jayeff ,

Texto:

Hi,

Here’s a [http://brotherprintersupportnumber.strikingly.com/blog/how-to-replace-the-ink-absorber-on-a-brother-printer|link] that describes how to replace the ink absorber in a Brother printer.

If it doesn’t reset after replacing the inkpad, here’s a link to a [https://www.youtube.com/watch?v=KecsLk0wUN8|video] that shows how to reset the purge counter for your printer. This should allow you to at least keep on printing.

Estado:

open