Saltar al contenido principal
Ayuda

Versión actual por: cknazze ,

Título:

Replacement battery keeps not being recognized

Texto:

I ordered and installed a replacement battery from iFixit and it seemed to be working fine for a while, however after running for a while the battery will not be recognized. When this happens, if I shut down and reset the SMC it will work again for a while but will later do the same thing resulting in needing another SMC reset.
 
I’ve also reset the PRAM along with updating to the latest SMC firmware for my Mac model all to no avail. I’ve inspected the battery connections many times and it appears to be plugged in just fine. I figured it’s not due to a faulty connection since a SMC reset kicks it back into gear, but this issue is really messing with my workflow.
 
Any help is greatly appreciated!
 
EDIT: I’ve also downloaded and ran CoconutBattery. After a fresh SMC reset, coconut says that the battery is in good condition and has no issues.
 
 
EDIT: I’ve also downloaded and ran CoconutBattery. After
EDIT 2: Here is
a fresh SMC reset, coconut says thatscreenshot of CoconutBattery with the batterySMC freshly reset (battery working) [image|1651796]



Here
is in good condition and has no issues.after battery stops being recognized: [image|1651797]
EDIT: I’ve also downloaded and ran CoconutBattery. After
EDIT 2: Here is
a fresh SMC reset, coconut says thatscreenshot of CoconutBattery with the batterySMC freshly reset (battery working) [image|1651796]



Here
is in good condition and has no issues.after battery stops being recognized: [image|1651797]

Dispositivo:

MacBook Pro 15" Unibody Mid 2012

Estatus:

open

Editado por: cknazze ,

Título:

Replacement battery keeps not being recognized

Texto:

I ordered and installed a replacement battery from iFixit and it seemed to be working fine for a while, however after running for a while the battery will not be recognized. When this happens, if I shut down and reset the SMC it will work again for a while but will later do the same thing resulting in needing another SMC reset.
 
I’ve also reset the PRAM along with updating to the latest SMC firmware for my Mac model all to no avail. I’ve inspected the battery connections many times and it appears to be plugged in just fine. I figured it’s not due to a faulty connection since a SMC reset kicks it back into gear, but this issue is really messing with my workflow.
 
Any help is greatly appreciated!
 
 
 
EDIT: I’ve also downloaded and ran CoconutBattery. After a fresh SMC reset, coconut says that the battery is in good condition and has no issues.

Dispositivo:

MacBook Pro 15" Unibody Mid 2012

Estatus:

open

Aporte original por: cknazze ,

Título:

Replacement battery keeps not being recognized

Texto:

I ordered and installed a replacement battery from iFixit and it seemed to be working fine for a while, however after running for a while the battery will not be recognized. When this happens, if I shut down and reset the SMC it will work again for a while but will later do the same thing resulting in needing another SMC reset.

I’ve also reset the PRAM along with updating to the latest SMC firmware for my Mac model all to no avail. I’ve inspected the battery connections many times and it appears to be plugged in just fine. I figured it’s not due to a faulty connection since a SMC reset kicks it back into gear, but this issue is really messing with my workflow.

Any help is greatly appreciated!

Dispositivo:

MacBook Pro 15" Unibody Mid 2012

Estatus:

open