Saltar al contenido principal
Ayuda

Versión actual por: Robbie1155 ,

Título:

Non-contact voltage detector not working on Multi Meter

Texto:

Hi,

I bought a Multimeter from JayCar Electronics today [https://www.jaycar.us/economy-autorange-multimeter-with-non-contact-voltage-sensor/p/QM1529|Digitech QM1529 DVM]. It works fine but one thing doesn’t work, the non-contact voltage detector.

When I try to use it with the DVM it comes up with - 951 when I’m not even holding it up to something!

[image|1533441]

I hope there is a fix

Thanks :)

Dispositivo:

Multimeter

Estatus:

open

Respuesta Aceptada:

512944

Editado por: Dan ,

Título:

Non-contact voltage detector not working on Multi Meter

Texto:

Hi,
 
I bought a Multimeter from JayCar Electronics today [https://www.jaycar.us/economy-autorange-multimeter-with-non-contact-voltage-sensor/p/QM1529|Digitech QM1529 DVM''']'''DVM]. It works fine but one thing doesn’t work, the non-contact voltage detector.
I bought a Multimeter from JayCar Electronics today [https://www.jaycar.us/economy-autorange-multimeter-with-non-contact-voltage-sensor/p/QM1529|Digitech QM1529 DVM''']'''DVM]. It works fine but one thing doesn’t work, the non-contact voltage detector.
 
When I try to use it with the DVM it comes up with - 951 when I’m not even holding it up to something!
 
[image|1533441]
 
I hope there is a fix
 
Thanks :)

Dispositivo:

Multimeter

Estatus:

open

Editado por: Dan ,

Título:

Non-contact voltage detector not working on Multi Meter

Texto:

Hi,
 
I bought a Multimeter from Jaycar todayJayCar Electronics today [https://www.jaycar.us/economy-autorange-multimeter-with-non-contact-voltage-sensor/p/QM1529|Digitech QM1529 DVM''']'''. It works fine but one thing douse’t workdoesn’t work, the non-contact voltage detector.
I bought a Multimeter from Jaycar todayJayCar Electronics today [https://www.jaycar.us/economy-autorange-multimeter-with-non-contact-voltage-sensor/p/QM1529|Digitech QM1529 DVM''']'''. It works fine but one thing douse’t workdoesn’t work, the non-contact voltage detector.
 
When I try to use it with the DVM it comes up with - 951 when I’m not even holding it up to something!
 
[image|1533441]
 
I hope there is a fix
 
Thanks :)

Dispositivo:

Multimeter

Estatus:

open

Editado por: Dan ,

Título:

None contactNon-contact voltage detector not working on Multi Meter
None contactNon-contact voltage detector not working on Multi Meter

Texto:

Hi,
 
I bought a Multi meterMultimeter from Jaycar today. It works fine but one thing douse’t work the non-contact voltage detector.
I bought a Multi meterMultimeter from Jaycar today. It works fine but one thing douse’t work the non-contact voltage detector.
 
It works fine but one thing douse’t work the none contact voltage detector whenWhen I try to use it with the Multi Meter comesDVM it comes up with - 951 when ImI’m not even holding it up to somethingsomething!
It works fine but one thing douse’t work the none contact voltage detector whenWhen I try to use it with the Multi Meter comesDVM it comes up with - 951 when ImI’m not even holding it up to somethingsomething!
 
[image|1533441]
 
I hope there is a fix
 
Thanks :)

Dispositivo:

Multimeter

Estatus:

open

Aporte original por: Robbie1155 ,

Título:

None contact voltage detector not working on Multi Meter

Texto:

Hi,

I bought a Multi meter from Jaycar today.

It works fine but one thing douse’t work the none contact voltage detector when I try use it the Multi Meter  comes up with - 951 when Im not even holding it up to something

[image|1533441]

I hope there is a fix

Thanks :)

Dispositivo:

Multimeter

Estatus:

open