Pido disculpas adelantadas por si debiera de hacer esta pregunta en otro apartado.
Ahí va el problema, tengo un MacBook A1181 (Intel Core 2 Duo/ Penryn 2.1 GHz) desde hace dos años.
Hace seis meses he ampliado la RAM a 4GB para instalar "Logic Express 9" y "Snow Leopard:SO"....todo bien.....excepto en algunas ocasiones cuando se calienta bastante.... pero se soluciona después de una pausa.
Desde hace tres días al encender el MB, aparece el "fondo gris con manzanita" pero a los 5'' segundos la pantalla se oscurece totalmente, casi negra.
Todas las funciones estás operativas, los tiempos de espera, ruidos, etc....se mantienen igual...no hay bloqueos....al iluminar la pantalla con una linterna, se ven los iconos y el funcionamiento se mantiene normal.
He reestablecido la SMC (Control Gestión Sistema) y PRAM unas tres veces.
He probado con la RAM original y el Mac OS X........ sin instalar "Snow Leopard".
Revisión de permisos, actualización de firmware, y dos Test de disco duro sin incidencias.
Formateado el disco duro,... reinstalado el software un par de veces, pero todo sigue igual.
Solo permite ver algo cuando reduzco totalmente la luminosidad, y desde ahí empiezo a aumentar el brillo....punto por punto de brillo.....hasta un máximo de 3 ó 4....si fuerzo un poco más en seguido vuelve a oscurecerse.
No he experimentado cambios al presionar el teclado, otras partes de la carcasa, o reiniciar con "Shift" pulsado.
He visto que otra persona comentaba la posibilidad de que fuese el convertidor o su propio cable.....lo que me ha alegrado al desechar temporalmente un fallo de la placa base.
Vuestros vídeos ponen los pelos de punta....enhorabuena, magnífico trabajo.
Quizás me abra las tripas si es un problema de cables o del conversor.
Muchas gracias una vez más.
Nacho.
'''Translated'''
Translation by Mayer
Greetings to all, thanks for your page. Please forgive me if this question should be in another section. Here’s the problem, I’ve have a MacBook A1181 (Intel the Core 2 Duo Penryn 2,1 GHz) for two years. Six months ago I upped the ram to 4GB. I wanted to install Logic Express 9 and Snow Leopard. All good ..... except sometimes when it warmed up…. but it is solved after a pause. For three days when starting the MB, appears " gray bottom with manzanita (branches). After 5 seconds the screen is darkened totally, almost black. All the functions are operative, the times of delay, noises, etc….they stay the same… are no blockades. When illuminating the screen with a flashlight, the icons are seen and the operation stays normal. I have reset the SMC and PRAM three times. I have tested the original ram and Mac OS X ........ without installing " Snow Leopard". Revision of permissions, update of firmware, and two Test of hard disk without incidences. Formatted the hard disk,… reinstated software a couple of times, but everything is the same. It only allows to see something when I lower the brightness totally, and from there I begin there to increase the brightness….little by little..... until a maximum of 3 or 4….if I force it further, it returns to darkness. I have not experienced changes when pressing the keyboard or other parts of the housing, or restarting with the " Shift" held down. I saw that another person commented on the possibility that it was the inverter or its cable ..... that made me happy, thinking the problem was not a motherboard failure. Your videos put the end hairs….congratulations, magnificent work. My gut feeling is, that it’s a problem of the cables or the converter. Thank you very much once again. Nacho.
-
-
== Update ==
-
-
Hola, buenos días Mayer, gracias por tu ayuda y por la traducción.
-
-
Voy a probar la salida a monitor externo.
-
-
Hoy la pantalla cada vez está peor y se oscurece constantemente.
-
-
ni siquiera con un único punto de brillo, así que he
-
-
estado todo el tiempo escribiendo con la linterna en la boca.
-
-
Las tres últimas del número de serie: '''OPO''' o sino '''0P0'''.
-
-
Además de tu forma de cambiar el cable y el inversor (entrando desde la batería)...qué opinas de llegar al inversor entrando por la articulación del monitor?.
-
-
http://www.youtube.com/watch?v=Z3-SQeABnaE
-
-
¿Tienes alguna preferencia/inconveniente de estos abordajes?
Pido disculpas adelantadas por si debiera de hacer esta pregunta en otro apartado.
Ahí va el problema, tengo un MacBook A1181 (Intel Core 2 Duo/ Penryn 2.1 GHz) desde hace dos años.
Hace seis meses he ampliado la RAM a 4GB para instalar "Logic Express 9" y "Snow Leopard:SO"....todo bien.....excepto en algunas ocasiones cuando se calienta bastante.... pero se soluciona después de una pausa.
Desde hace tres días al encender el MB, aparece el "fondo gris con manzanita" pero a los 5'' segundos la pantalla se oscurece totalmente, casi negra.
Todas las funciones estás operativas, los tiempos de espera, ruidos, etc....se mantienen igual...no hay bloqueos....al iluminar la pantalla con una linterna, se ven los iconos y el funcionamiento se mantiene normal.
He reestablecido la SMC (Control Gestión Sistema) y PRAM unas tres veces.
He probado con la RAM original y el Mac OS X........ sin instalar "Snow Leopard".
Revisión de permisos, actualización de firmware, y dos Test de disco duro sin incidencias.
Formateado el disco duro,... reinstalado el software un par de veces, pero todo sigue igual.
Solo permite ver algo cuando reduzco totalmente la luminosidad, y desde ahí empiezo a aumentar el brillo....punto por punto de brillo.....hasta un máximo de 3 ó 4....si fuerzo un poco más en seguido vuelve a oscurecerse.
No he experimentado cambios al presionar el teclado, otras partes de la carcasa, o reiniciar con "Shift" pulsado.
He visto que otra persona comentaba la posibilidad de que fuese el convertidor o su propio cable.....lo que me ha alegrado al desechar temporalmente un fallo de la placa base.
Vuestros vídeos ponen los pelos de punta....enhorabuena, magnífico trabajo.
Quizás me abra las tripas si es un problema de cables o del conversor.
Muchas gracias una vez más.
Nacho.
'''Translated'''
Translation by Mayer
Greetings to all, thanks for your page. Please forgive me if this question should be in another section. Here’s the problem, I’ve have a MacBook A1181 (Intel the Core 2 Duo Penryn 2,1 GHz) for two years. Six months ago I upped the ram to 4GB. I wanted to install Logic Express 9 and Snow Leopard. All good ..... except sometimes when it warmed up…. but it is solved after a pause. For three days when starting the MB, appears " gray bottom with manzanita (branches). After 5 seconds the screen is darkened totally, almost black. All the functions are operative, the times of delay, noises, etc….they stay the same… are no blockades. When illuminating the screen with a flashlight, the icons are seen and the operation stays normal. I have reset the SMC and PRAM three times. I have tested the original ram and Mac OS X ........ without installing " Snow Leopard". Revision of permissions, update of firmware, and two Test of hard disk without incidences. Formatted the hard disk,… reinstated software a couple of times, but everything is the same. It only allows to see something when I lower the brightness totally, and from there I begin there to increase the brightness….little by little..... until a maximum of 3 or 4….if I force it further, it returns to darkness. I have not experienced changes when pressing the keyboard or other parts of the housing, or restarting with the " Shift" held down. I saw that another person commented on the possibility that it was the inverter or its cable ..... that made me happy, thinking the problem was not a motherboard failure. Your videos put the end hairs….congratulations, magnificent work. My gut feeling is, that it’s a problem of the cables or the converter. Thank you very much once again. Nacho.
-
== Update ==
+
== Update ==
-
Hola, buenos días Mayer, gracias por tu ayuda y por la traducción.
+
Voy a probar la salida a monitor externo.
+
Hoy la pantalla cada vez está peor y se oscurece constantemente.
+
ni siquiera con un único punto de brillo, así que he
+
estado todo el tiempo escribiendo con la linterna en la boca.
+
Las tres últimas del número de serie: '''OPO''' o sino '''0P0'''.
Además de tu forma de cambiar el cable y el inversor (entrando desde la batería)...qué opinas de llegar al inversor entrando por la articulación del monitor?.
-
http://www.youtube.com/watch?v=Z3-SQeABnaE
+
http://www.youtube.com/watch?v=Z3-SQeABnaE
¿Tienes alguna preferencia/inconveniente de estos abordajes?
Pido disculpas adelantadas por si debiera de hacer esta pregunta en otro apartado.
Ahí va el problema, tengo un MacBook A1181 (Intel Core 2 Duo/ Penryn 2.1 GHz) desde hace dos años.
Hace seis meses he ampliado la RAM a 4GB para instalar "Logic Express 9" y "Snow Leopard:SO"....todo bien.....excepto en algunas ocasiones cuando se calienta bastante.... pero se soluciona después de una pausa.
Desde hace tres días al encender el MB, aparece el "fondo gris con manzanita" pero a los 5'' segundos la pantalla se oscurece totalmente, casi negra.
Todas las funciones estás operativas, los tiempos de espera, ruidos, etc....se mantienen igual...no hay bloqueos....al iluminar la pantalla con una linterna, se ven los iconos y el funcionamiento se mantiene normal.
He reestablecido la SMC (Control Gestión Sistema) y PRAM unas tres veces.
He probado con la RAM original y el Mac OS X........ sin instalar "Snow Leopard".
Revisión de permisos, actualización de firmware, y dos Test de disco duro sin incidencias.
Formateado el disco duro,... reinstalado el software un par de veces, pero todo sigue igual.
Solo permite ver algo cuando reduzco totalmente la luminosidad, y desde ahí empiezo a aumentar el brillo....punto por punto de brillo.....hasta un máximo de 3 ó 4....si fuerzo un poco más en seguido vuelve a oscurecerse.
No he experimentado cambios al presionar el teclado, otras partes de la carcasa, o reiniciar con "Shift" pulsado.
He visto que otra persona comentaba la posibilidad de que fuese el convertidor o su propio cable.....lo que me ha alegrado al desechar temporalmente un fallo de la placa base.
Vuestros vídeos ponen los pelos de punta....enhorabuena, magnífico trabajo.
Quizás me abra las tripas si es un problema de cables o del conversor.
Muchas gracias una vez más.
Nacho.
'''Translated'''
-
Translation by Mayer
Greetings to all, thanks for your page. Please forgive me if this question should be in another section. Here’s the problem, I’ve have a MacBook A1181 (Intel the Core 2 Duo Penryn 2,1 GHz) for two years. Six months ago I upped the ram to 4GB. I wanted to install Logic Express 9 and Snow Leopard. All good ..... except sometimes when it warmed up…. but it is solved after a pause. For three days when starting the MB, appears " gray bottom with manzanita (branches). After 5 seconds the screen is darkened totally, almost black. All the functions are operative, the times of delay, noises, etc….they stay the same… are no blockades. When illuminating the screen with a flashlight, the icons are seen and the operation stays normal. I have reset the SMC and PRAM three times. I have tested the original ram and Mac OS X ........ without installing " Snow Leopard". Revision of permissions, update of firmware, and two Test of hard disk without incidences. Formatted the hard disk,… reinstated software a couple of times, but everything is the same. It only allows to see something when I lower the brightness totally, and from there I begin there to increase the brightness….little by little..... until a maximum of 3 or 4….if I force it further, it returns to darkness. I have not experienced changes when pressing the keyboard or other parts of the housing, or restarting with the " Shift" held down. I saw that another person commented on the possibility that it was the inverter or its cable ..... that made me happy, thinking the problem was not a motherboard failure. Your videos put the end hairs….congratulations, magnificent work. My gut feeling is, that it’s a problem of the cables or the converter. Thank you very much once again. Nacho.
+
+
== Update ==
+
+
+
Hola, buenos días Mayer, gracias por tu ayuda y por la traducción.
+
Voy a probar la salida a monitor externo.
+
Hoy la pantalla cada vez está peor y se oscurece constantemente.
+
ni siquiera con un único punto de brillo, así que he
+
estado todo el tiempo escribiendo con la linterna en la boca.
+
Las tres últimas del número de serie: '''OPO''' o sino '''0P0'''.
+
+
Además de tu forma de cambiar el cable y el inversor (entrando desde la batería)...qué opinas de llegar al inversor entrando por la articulación del monitor?.
+
+
http://www.youtube.com/watch?v=Z3-SQeABnaE
+
+
¿Tienes alguna preferencia/inconveniente de estos abordajes?
Pido disculpas adelantadas por si debiera de hacer esta pregunta en otro apartado.
Ahí va el problema, tengo un MacBook A1181 (Intel Core 2 Duo/ Penryn 2.1 GHz) desde hace dos años.
Hace seis meses he ampliado la RAM a 4GB para instalar "Logic Express 9" y "Snow Leopard:SO"....todo bien.....excepto en algunas ocasiones cuando se calienta bastante.... pero se soluciona después de una pausa.
Desde hace tres días al encender el MB, aparece el "fondo gris con manzanita" pero a los 5'' segundos la pantalla se oscurece totalmente, casi negra.
Todas las funciones estás operativas, los tiempos de espera, ruidos, etc....se mantienen igual...no hay bloqueos....al iluminar la pantalla con una linterna, se ven los iconos y el funcionamiento se mantiene normal.
He reestablecido la SMC (Control Gestión Sistema) y PRAM unas tres veces.
He probado con la RAM original y el Mac OS X........ sin instalar "Snow Leopard".
Revisión de permisos, actualización de firmware, y dos Test de disco duro sin incidencias.
Formateado el disco duro,... reinstalado el software un par de veces, pero todo sigue igual.
Solo permite ver algo cuando reduzco totalmente la luminosidad, y desde ahí empiezo a aumentar el brillo....punto por punto de brillo.....hasta un máximo de 3 ó 4....si fuerzo un poco más en seguido vuelve a oscurecerse.
No he experimentado cambios al presionar el teclado, otras partes de la carcasa, o reiniciar con "Shift" pulsado.
He visto que otra persona comentaba la posibilidad de que fuese el convertidor o su propio cable.....lo que me ha alegrado al desechar temporalmente un fallo de la placa base.
Vuestros vídeos ponen los pelos de punta....enhorabuena, magnífico trabajo.
Quizás me abra las tripas si es un problema de cables o del conversor.
Muchas gracias una vez más.
Nacho.
'''Translated'''
-
Greetings to all, thanks for your page. I request advanced excuses in case it had to make this question in another section. There the problem goes, I have a MacBook A1181 (Intel the 2 Cores Pair Penryn 2,1 GHz) for two years. For six months I have been extending the ram to 4GB to install " Logic Express 9" and " Snow Leopard: SO" ….all good ..... except sometimes when it is warmed up enough…. but it is solved after a pause. For three days when igniting the MB, appears " gray bottom with manzanita" but to 5' ' seconds the screen is darkened totally, almost black. All the functions you are operative, the times of delay, noises, etc….they stay equal… are no blockades….when illuminating the screen with a lantern, the icons are seen and the operation stays normal. I have reestablished SMC (Control Gestión Sistema) and PRAM three times. I have proven with the original ram and Mac OS X ........ without installing " Snow Leopard". Revision of permissions, update of firmware, and two Test of hard disk without incidences. Formatted the hard disk,… reinstated software a pair of times, but everything follows equal. It only allows to see something when I reduce the luminosity totally, and from I begin there to increase the brightness….point by point of brightness ..... until a maximum of 3 or 4….if I force a little in followed more it returns to darken itself. I have not undergone changes when pressing the keyboard, other parts of the housing, or reinitiating with " Shift" beaten. I have seen that another person commented the possibility that it was the converter or its own cable ..... what has cheered when rejecting temporarily a failure to me of the motherboard. Your videos put the end hairs….enhorabuena, magnificent work. Perhaps it abra the guts to me if it is a problem of cables or the converter. Thank you very much once again. Nacho.
Translation by Mayer
Greetings to all, thanks for your page. Please forgive me if this question should be in another section. Here’s the problem, I’ve have a MacBook A1181 (Intel the Core 2 Duo Penryn 2,1 GHz) for two years. Six months ago I upped the ram to 4GB. I wanted to install Logic Express 9 and Snow Leopard. All good ..... except sometimes when it warmed up…. but it is solved after a pause. For three days when starting the MB, appears " gray bottom with manzanita (branches). After 5 seconds the screen is darkened totally, almost black. All the functions are operative, the times of delay, noises, etc….they stay the same… are no blockades. When illuminating the screen with a flashlight, the icons are seen and the operation stays normal. I have reset the SMC and PRAM three times. I have tested the original ram and Mac OS X ........ without installing " Snow Leopard". Revision of permissions, update of firmware, and two Test of hard disk without incidences. Formatted the hard disk,… reinstated software a couple of times, but everything is the same. It only allows to see something when I lower the brightness totally, and from there I begin there to increase the brightness….little by little..... until a maximum of 3 or 4….if I force it further, it returns to darkness. I have not experienced changes when pressing the keyboard or other parts of the housing, or restarting with the " Shift" held down. I saw that another person commented on the possibility that it was the inverter or its cable ..... that made me happy, thinking the problem was not a motherboard failure. Your videos put the end hairs….congratulations, magnificent work. My gut feeling is, that it’s a problem of the cables or the converter. Thank you very much once again. Nacho.
Pido disculpas adelantadas por si debiera de hacer esta pregunta en otro apartado.
Ahí va el problema, tengo un MacBook A1181 (Intel Core 2 Duo/ Penryn 2.1 GHz) desde hace dos años.
Hace seis meses he ampliado la RAM a 4GB para instalar "Logic Express 9" y "Snow Leopard:SO"....todo bien.....excepto en algunas ocasiones cuando se calienta bastante.... pero se soluciona después de una pausa.
Desde hace tres días al encender el MB, aparece el "fondo gris con manzanita" pero a los 5'' segundos la pantalla se oscurece totalmente, casi negra.
Todas las funciones estás operativas, los tiempos de espera, ruidos, etc....se mantienen igual...no hay bloqueos....al iluminar la pantalla con una linterna, se ven los iconos y el funcionamiento se mantiene normal.
He reestablecido la SMC (Control Gestión Sistema) y PRAM unas tres veces.
He probado con la RAM original y el Mac OS X........ sin instalar "Snow Leopard".
Revisión de permisos, actualización de firmware, y dos Test de disco duro sin incidencias.
Formateado el disco duro,... reinstalado el software un par de veces, pero todo sigue igual.
Solo permite ver algo cuando reduzco totalmente la luminosidad, y desde ahí empiezo a aumentar el brillo....punto por punto de brillo.....hasta un máximo de 3 ó 4....si fuerzo un poco más en seguido vuelve a oscurecerse.
No he experimentado cambios al presionar el teclado, otras partes de la carcasa, o reiniciar con "Shift" pulsado.
He visto que otra persona comentaba la posibilidad de que fuese el convertidor o su propio cable.....lo que me ha alegrado al desechar temporalmente un fallo de la placa base.
Vuestros vídeos ponen los pelos de punta....enhorabuena, magnífico trabajo.
Quizás me abra las tripas si es un problema de cables o del conversor.
Muchas gracias una vez más.
Nacho.
'''Translated'''
Greetings to all, thanks for your page. I request advanced excuses in case it had to make this question in another section. There the problem goes, I have a MacBook A1181 (Intel the 2 Cores Pair Penryn 2,1 GHz) for two years. For six months I have been extending the ram to 4GB to install " Logic Express 9" and " Snow Leopard: SO" ….all good ..... except sometimes when it is warmed up enough…. but it is solved after a pause. For three days when igniting the MB, appears " gray bottom with manzanita" but to 5' ' seconds the screen is darkened totally, almost black. All the functions you are operative, the times of delay, noises, etc….they stay equal… are no blockades….when illuminating the screen with a lantern, the icons are seen and the operation stays normal. I have reestablished SMC (Control Gestión Sistema) and PRAM three times. I have proven with the original ram and Mac OS X ........ without installing " Snow Leopard". Revision of permissions, update of firmware, and two Test of hard disk without incidences. Formatted the hard disk,… reinstated software a pair of times, but everything follows equal. It only allows to see something when I reduce the luminosity totally, and from I begin there to increase the brightness….point by point of brightness ..... until a maximum of 3 or 4….if I force a little in followed more it returns to darken itself. I have not undergone changes when pressing the keyboard, other parts of the housing, or reinitiating with " Shift" beaten. I have seen that another person commented the possibility that it was the converter or its own cable ..... what has cheered when rejecting temporarily a failure to me of the motherboard. Your videos put the end hairs….enhorabuena, magnificent work. Perhaps it abra the guts to me if it is a problem of cables or the converter. Thank you very much once again. Nacho.
Translation by Mayer
-
Greetings to all, thanks for your page. Please forgive me if this question should be in another section. Here’s the problem, I’ve have a MacBook A1181 (Intel the Core 2 Duo Penryn 2,1 GHz) for two years. Six months I have been expanded the ram to 4GB. I wanted to install Logic Express 9 and Snow Leopard. All good ..... except sometimes when it is warmed up…. but it is solved after a pause. For three days when starting the MB, appears " gray bottom with manzanita (branches). After 5 seconds the screen is darkened totally, almost black. All the functions you are operative, the times of delay, noises, etc….they stay equal… are no blockades….when illuminating the screen with a flashlight, the icons are seen and the operation stays normal. I have reset the SMC and PRAM three times. I have tested the original ram and Mac OS X ........ without installing " Snow Leopard". Revision of permissions, update of firmware, and two Test of hard disk without incidences. Formatted the hard disk,… reinstated software a couple of times, but everything is the same. It only allows to see something when I lower the brightness totally, and from there I begin there to increase the brightness….little by little..... until a maximum of 3 or 4….if I force it further, it returns to darkness. I have not experienced changes when pressing the keyboard or other parts of the housing, or restarting with the " Shift" held down. I saw that another person commented on the possibility that it was the inverter or its cable ..... that made me happy, thinking the problem was not a motherboard failure. Your videos put the end hairs….congratulations, magnificent work. My gut feeling is, that it’s a problem of the cables or the converter. Thank you very much once again. Nacho.
+
Greetings to all, thanks for your page. Please forgive me if this question should be in another section. Here’s the problem, I’ve have a MacBook A1181 (Intel the Core 2 Duo Penryn 2,1 GHz) for two years. Six months ago I upped the ram to 4GB. I wanted to install Logic Express 9 and Snow Leopard. All good ..... except sometimes when it warmed up…. but it is solved after a pause. For three days when starting the MB, appears " gray bottom with manzanita (branches). After 5 seconds the screen is darkened totally, almost black. All the functions are operative, the times of delay, noises, etc….they stay the same… are no blockades. When illuminating the screen with a flashlight, the icons are seen and the operation stays normal. I have reset the SMC and PRAM three times. I have tested the original ram and Mac OS X ........ without installing " Snow Leopard". Revision of permissions, update of firmware, and two Test of hard disk without incidences. Formatted the hard disk,… reinstated software a couple of times, but everything is the same. It only allows to see something when I lower the brightness totally, and from there I begin there to increase the brightness….little by little..... until a maximum of 3 or 4….if I force it further, it returns to darkness. I have not experienced changes when pressing the keyboard or other parts of the housing, or restarting with the " Shift" held down. I saw that another person commented on the possibility that it was the inverter or its cable ..... that made me happy, thinking the problem was not a motherboard failure. Your videos put the end hairs….congratulations, magnificent work. My gut feeling is, that it’s a problem of the cables or the converter. Thank you very much once again. Nacho.
Pido disculpas adelantadas por si debiera de hacer esta pregunta en otro apartado.
Ahí va el problema, tengo un MacBook A1181 (Intel Core 2 Duo/ Penryn 2.1 GHz) desde hace dos años.
Hace seis meses he ampliado la RAM a 4GB para instalar "Logic Express 9" y "Snow Leopard:SO"....todo bien.....excepto en algunas ocasiones cuando se calienta bastante.... pero se soluciona después de una pausa.
Desde hace tres días al encender el MB, aparece el "fondo gris con manzanita" pero a los 5'' segundos la pantalla se oscurece totalmente, casi negra.
Todas las funciones estás operativas, los tiempos de espera, ruidos, etc....se mantienen igual...no hay bloqueos....al iluminar la pantalla con una linterna, se ven los iconos y el funcionamiento se mantiene normal.
He reestablecido la SMC (Control Gestión Sistema) y PRAM unas tres veces.
He probado con la RAM original y el Mac OS X........ sin instalar "Snow Leopard".
Revisión de permisos, actualización de firmware, y dos Test de disco duro sin incidencias.
Formateado el disco duro,... reinstalado el software un par de veces, pero todo sigue igual.
Solo permite ver algo cuando reduzco totalmente la luminosidad, y desde ahí empiezo a aumentar el brillo....punto por punto de brillo.....hasta un máximo de 3 ó 4....si fuerzo un poco más en seguido vuelve a oscurecerse.
No he experimentado cambios al presionar el teclado, otras partes de la carcasa, o reiniciar con "Shift" pulsado.
He visto que otra persona comentaba la posibilidad de que fuese el convertidor o su propio cable.....lo que me ha alegrado al desechar temporalmente un fallo de la placa base.
Vuestros vídeos ponen los pelos de punta....enhorabuena, magnífico trabajo.
Quizás me abra las tripas si es un problema de cables o del conversor.
Muchas gracias una vez más.
Nacho.
'''Translated'''
Greetings to all, thanks for your page. I request advanced excuses in case it had to make this question in another section. There the problem goes, I have a MacBook A1181 (Intel the 2 Cores Pair Penryn 2,1 GHz) for two years. For six months I have been extending the ram to 4GB to install " Logic Express 9" and " Snow Leopard: SO" ….all good ..... except sometimes when it is warmed up enough…. but it is solved after a pause. For three days when igniting the MB, appears " gray bottom with manzanita" but to 5' ' seconds the screen is darkened totally, almost black. All the functions you are operative, the times of delay, noises, etc….they stay equal… are no blockades….when illuminating the screen with a lantern, the icons are seen and the operation stays normal. I have reestablished SMC (Control Gestión Sistema) and PRAM three times. I have proven with the original ram and Mac OS X ........ without installing " Snow Leopard". Revision of permissions, update of firmware, and two Test of hard disk without incidences. Formatted the hard disk,… reinstated software a pair of times, but everything follows equal. It only allows to see something when I reduce the luminosity totally, and from I begin there to increase the brightness….point by point of brightness ..... until a maximum of 3 or 4….if I force a little in followed more it returns to darken itself. I have not undergone changes when pressing the keyboard, other parts of the housing, or reinitiating with " Shift" beaten. I have seen that another person commented the possibility that it was the converter or its own cable ..... what has cheered when rejecting temporarily a failure to me of the motherboard. Your videos put the end hairs….enhorabuena, magnificent work. Perhaps it abra the guts to me if it is a problem of cables or the converter. Thank you very much once again. Nacho.
+
+
Translation by Mayer
+
+
Greetings to all, thanks for your page. Please forgive me if this question should be in another section. Here’s the problem, I’ve have a MacBook A1181 (Intel the Core 2 Duo Penryn 2,1 GHz) for two years. Six months I have been expanded the ram to 4GB. I wanted to install Logic Express 9 and Snow Leopard. All good ..... except sometimes when it is warmed up…. but it is solved after a pause. For three days when starting the MB, appears " gray bottom with manzanita (branches). After 5 seconds the screen is darkened totally, almost black. All the functions you are operative, the times of delay, noises, etc….they stay equal… are no blockades….when illuminating the screen with a flashlight, the icons are seen and the operation stays normal. I have reset the SMC and PRAM three times. I have tested the original ram and Mac OS X ........ without installing " Snow Leopard". Revision of permissions, update of firmware, and two Test of hard disk without incidences. Formatted the hard disk,… reinstated software a couple of times, but everything is the same. It only allows to see something when I lower the brightness totally, and from there I begin there to increase the brightness….little by little..... until a maximum of 3 or 4….if I force it further, it returns to darkness. I have not experienced changes when pressing the keyboard or other parts of the housing, or restarting with the " Shift" held down. I saw that another person commented on the possibility that it was the inverter or its cable ..... that made me happy, thinking the problem was not a motherboard failure. Your videos put the end hairs….congratulations, magnificent work. My gut feeling is, that it’s a problem of the cables or the converter. Thank you very much once again. Nacho.
Pido disculpas adelantadas por si debiera de hacer esta pregunta en otro apartado.
Ahí va el problema, tengo un MacBook A1181 (Intel Core 2 Duo/ Penryn 2.1 GHz) desde hace dos años.
Hace seis meses he ampliado la RAM a 4GB para instalar "Logic Express 9" y "Snow Leopard:SO"....todo bien.....excepto en algunas ocasiones cuando se calienta bastante.... pero se soluciona después de una pausa.
Desde hace tres días al encender el MB, aparece el "fondo gris con manzanita" pero a los 5'' segundos la pantalla se oscurece totalmente, casi negra.
Todas las funciones estás operativas, los tiempos de espera, ruidos, etc....se mantienen igual...no hay bloqueos....al iluminar la pantalla con una linterna, se ven los iconos y el funcionamiento se mantiene normal.
He reestablecido la SMC (Control Gestión Sistema) y PRAM unas tres veces.
He probado con la RAM original y el Mac OS X........ sin instalar "Snow Leopard".
Revisión de permisos, actualización de firmware, y dos Test de disco duro sin incidencias.
Formateado el disco duro,... reinstalado el software un par de veces, pero todo sigue igual.
Solo permite ver algo cuando reduzco totalmente la luminosidad, y desde ahí empiezo a aumentar el brillo....punto por punto de brillo.....hasta un máximo de 3 ó 4....si fuerzo un poco más en seguido vuelve a oscurecerse.
No he experimentado cambios al presionar el teclado, otras partes de la carcasa, o reiniciar con "Shift" pulsado.
He visto que otra persona comentaba la posibilidad de que fuese el convertidor o su propio cable.....lo que me ha alegrado al desechar temporalmente un fallo de la placa base.
Vuestros vídeos ponen los pelos de punta....enhorabuena, magnífico trabajo.
Quizás me abra las tripas si es un problema de cables o del conversor.
Muchas gracias una vez más.
Nacho.
+
+
'''Translated'''
+
+
Greetings to all, thanks for your page. I request advanced excuses in case it had to make this question in another section. There the problem goes, I have a MacBook A1181 (Intel the 2 Cores Pair Penryn 2,1 GHz) for two years. For six months I have been extending the ram to 4GB to install " Logic Express 9" and " Snow Leopard: SO" ….all good ..... except sometimes when it is warmed up enough…. but it is solved after a pause. For three days when igniting the MB, appears " gray bottom with manzanita" but to 5' ' seconds the screen is darkened totally, almost black. All the functions you are operative, the times of delay, noises, etc….they stay equal… are no blockades….when illuminating the screen with a lantern, the icons are seen and the operation stays normal. I have reestablished SMC (Control Gestión Sistema) and PRAM three times. I have proven with the original ram and Mac OS X ........ without installing " Snow Leopard". Revision of permissions, update of firmware, and two Test of hard disk without incidences. Formatted the hard disk,… reinstated software a pair of times, but everything follows equal. It only allows to see something when I reduce the luminosity totally, and from I begin there to increase the brightness….point by point of brightness ..... until a maximum of 3 or 4….if I force a little in followed more it returns to darken itself. I have not undergone changes when pressing the keyboard, other parts of the housing, or reinitiating with " Shift" beaten. I have seen that another person commented the possibility that it was the converter or its own cable ..... what has cheered when rejecting temporarily a failure to me of the motherboard. Your videos put the end hairs….enhorabuena, magnificent work. Perhaps it abra the guts to me if it is a problem of cables or the converter. Thank you very much once again. Nacho.
Saludos a todos, gracias por vuestra página.
Pido disculpas adelantadas por si debiera de hacer esta pregunta en otro apartado.
Ahí va el problema, tengo un MacBook A1181 (Intel Core 2 Duo/ Penryn 2.1 GHz) desde hace dos años.
Hace seis meses he ampliado la RAM a 4GB para instalar "Logic Express 9" y "Snow Leopard:SO"....todo bien.....excepto en algunas ocasiones cuando se calienta bastante.... pero se soluciona después de una pausa.
Desde hace tres días al encender el MB, aparece el "fondo gris con manzanita" pero a los 5'' segundos la pantalla se oscurece totalmente, casi negra.
Todas las funciones estás operativas, los tiempos de espera, ruidos, etc....se mantienen igual...no hay bloqueos....al iluminar la pantalla con una linterna, se ven los iconos y el funcionamiento se mantiene normal.
He reestablecido la SMC (Control Gestión Sistema) y PRAM unas tres veces.
He probado con la RAM original y el Mac OS X........ sin instalar "Snow Leopard".
Revisión de permisos, actualización de firmware, y dos Test de disco duro sin incidencias.
Formateado el disco duro,... reinstalado el software un par de veces, pero todo sigue igual.
Solo permite ver algo cuando reduzco totalmente la luminosidad, y desde ahí empiezo a aumentar el brillo....punto por punto de brillo.....hasta un máximo de 3 ó 4....si fuerzo un poco más en seguido vuelve a oscurecerse.
No he experimentado cambios al presionar el teclado, otras partes de la carcasa, o reiniciar con "Shift" pulsado.
He visto que otra persona comentaba la posibilidad de que fuese el convertidor o su propio cable.....lo que me ha alegrado al desechar temporalmente un fallo de la placa base.
Vuestros vídeos ponen los pelos de punta....enhorabuena, magnífico trabajo.
Quizás me abra las tripas si es un problema de cables o del conversor.
Muchas gracias una vez más.
Nacho.