Saltar al contenido principal
Ayuda

Versión actual por: oldturkey03 (detalles del voto) ,

Título:

Replacing FPC connector, pins disappeared!

Texto:

Hello
 
I was changing a digitizer that had been changed again and noticed that some pins were almost ripped off. After testing the new digitizer being happy that everything works smoothly (there were more repairs), when I removed the digitizer to reassemble completely 3 pins of the fpc connector followed the digitizer :/ .
 
After some searching for the appropriate flux and heat protection tape (Greece's market on this parts is extremely low, they had only plumbers flux) I started the repair.
 
I've been stuck at a point though.
 
--------------------------------
 
'''Two pins on the logic board are like they disappeared after moving the soldering iron across the pins.'''
 
'''See links bellow.'''
 
-------------------------------
 
[https://drive.google.com/open?id=0Bznj_EBe4UGNTDJ0cm1CU2drYWlrNHhpQndRa1MzWUotc0Jj|Exhibit A]
 
[https://drive.google.com/open?id=0Bznj_EBe4UGNbEFtNXQ0aUc2cWVnSHJLdmJTcTE3VkxMQTQw|Exhibit B]
 
What's my next move?
 
Thanks,
 
Dim

Dispositivo:

iPad Mini GSM

Estatus:

open

Respuesta Aceptada:

483739

Editado por: MDims ,

Título:

Replacing FPC connector, pins disappeared!

Texto:

Hello
 
I was changing a digitizer that had been changed again and noticed that some pins were almost ripped off. After testing the new digitizer being happy that everything works smoothly (there were more repairs), when I removed the digitizer to reassemble completely 3 pins of the fpc connector followed the digitizer :/ .
 
After some searching for the appropriate flux and heat protection tape (Greece's market on this parts is extremely low, they had only plumbers flux) I started the repair.
 
I've been stuck at a point though.
 
Two--------------------------------
'''Two
pins on the logic board are like they disappeared after moving the soldering iron across the pins.pins.'''
Two--------------------------------
'''Two
pins on the logic board are like they disappeared after moving the soldering iron across the pins.pins.'''
 
See'''See links bellow.bellow.'''
-------------------------------
See'''See links bellow.bellow.'''
-------------------------------
 
[https://drive.google.com/open?id=0Bznj_EBe4UGNTDJ0cm1CU2drYWlrNHhpQndRa1MzWUotc0Jj|Exhibit A]
 
[https://drive.google.com/open?id=0Bznj_EBe4UGNbEFtNXQ0aUc2cWVnSHJLdmJTcTE3VkxMQTQw|Exhibit B]
 
What's my next move?
 
Thanks,
 
Dim

Dispositivo:

iPad Mini GSM

Estatus:

open

Aporte original por: MDims ,

Título:

Replacing FPC connector, pins disappeared!

Texto:

Hello

I was changing a digitizer that had been changed again and noticed that some pins were almost ripped off. After testing the new digitizer being happy that everything works smoothly (there were more repairs), when I removed the digitizer to reassemble completely 3 pins of the fpc connector followed the digitizer :/ .

After some searching for the appropriate flux and heat protection tape (Greece's market on this parts is extremely low, they had only plumbers flux) I started the repair.

I've been stuck at a point though.

Two pins on the logic board are like they disappeared after moving the soldering iron across the pins.

See links bellow.

[https://drive.google.com/open?id=0Bznj_EBe4UGNTDJ0cm1CU2drYWlrNHhpQndRa1MzWUotc0Jj|Exhibit A]

[https://drive.google.com/open?id=0Bznj_EBe4UGNbEFtNXQ0aUc2cWVnSHJLdmJTcTE3VkxMQTQw|Exhibit B]

What's my next move?

Thanks,

Dim

Dispositivo:

iPad Mini GSM

Estatus:

open