Saltar al contenido principal
Ayuda

Versión actual por: jayeff ,

Texto:

Hi @cloisterblack
Hi @cloisterblack
 
As you know water and electronics and electricity are not a good mix.
 
''The water causes corrosion and provides circuit paths for the electricity which were not in the console'sdevice's operating design and could damage the components.''
''The water causes corrosion and provides circuit paths for the electricity which were not in the console'sdevice's operating design and could damage the components.''
 
'''Rice''' is good to eat but '''does nothing to fix the problems''' caused by corrosion.
 
[[Don't Put Your Device in Rice. Here's Why...]]
 
''First '''do not turn on your consoledevice ''' and then you need to with the consoledevice turned off, '''remove the battery as soon as possible''' from the device'' to minimize further damage.''
''First '''do not turn on your consoledevice ''' and then you need to with the consoledevice turned off, '''remove the battery as soon as possible''' from the device'' to minimize further damage.''
 
Then you need to dis-assemble the rest of it and clean ''all the affected parts'' using '''Isopropyl Alcohol 90%+''' (available at most pharmacies) to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% or less, can contain scents and is not as effective. If you do check the label to verify the amount of IPA
 
Here is a link that describes the process.
 
[[Electronics Water Damage]]
 
As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.
 
Hopefully after you have done all this it ''might'' possibly work correctly again.
 
Here is a link to the ifixit guide(s) for repairing your game consoledevice.
Here is a link to the ifixit guide(s) for repairing your game consoledevice.
 
[[Topic:Nintendo 3DS 2015]]
 
If this process seems too daunting, take your device to a reputable, professional electronics repair service experienced in liquid damage repair and ask for a quote for a repair. If you decide to do this,'' do it sooner than later''.

Estatus:

open

Editado por: jayeff ,

Texto:

Hi @helpmyphonedead ,@cloisterblack
Hi @helpmyphonedead ,@cloisterblack
 
As you know water and electronics and electricity are not a good mix.
 
''The water causes corrosion and provides circuit paths for the electricity which were not in the console's operating design and could damage the components.''
 
'''Rice''' is good to eat but '''does nothing to fix the problems''' caused by corrosion.
 
[[Don't Put Your Device in Rice. Here's Why...]]
 
''First '''do not turn on your console''' and then you need to with the console turned off, '''remove the battery as soon as possible''' from the device'' to minimize further damage.''
 
Then you need to dis-assemble the rest of it and clean ''all the affected parts'' using '''Isopropyl Alcohol 90%+''' (available at most pharmacies) to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% or less, can contain scents and is not as effective. If you do check the label to verify the amount of IPA
 
Here is a link that describes the process.
 
[[Electronics Water Damage]]
 
As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.
 
Hopefully after you have done all this it ''might'' possibly work correctly again.
 
Here is a link to the ifixit guide(s) for repairing your game console.
 
[[Topic:Nintendo 3DS 2015]]
 
If this process seems too daunting, take your device to a reputable, professional electronics repair service experienced in liquid damage repair and ask for a quote for a repair. If you decide to do this,'' do it sooner than later''.

Estatus:

open

Aporte original por: jayeff ,

Texto:

Hi @helpmyphonedead ,

As you know water and electronics and electricity are not a good mix.

''The water causes corrosion and provides circuit paths for the electricity which were not in the console's operating design and could damage the components.''

'''Rice''' is good to eat but '''does nothing to fix the problems''' caused by corrosion.

[[Don't Put Your Device in Rice. Here's Why...]]

''First '''do not turn on your console''' and then you need to with the console turned off, '''remove the battery as soon as possible''' from the device'' to minimize further damage.''

Then you need to dis-assemble the rest of it and  clean ''all the affected parts'' using '''Isopropyl Alcohol 90%+''' (available at most pharmacies) to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% or less, can contain scents and is not as effective. If you do check the label to verify the  amount  of IPA

Here is a link that describes the process.

[[Electronics Water Damage]]

As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.

Hopefully after you have done all this it ''might'' possibly work correctly again.

Here is a link to the ifixit guide(s) for repairing your game console.

[[Topic:Nintendo 3DS 2015]]

If this process seems too daunting, take your device to a reputable, professional electronics repair service experienced in liquid damage repair and ask for a quote for a repair. If you decide to do this,'' do it sooner than later''.

Estatus:

open