Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Versión actual por: Jae Ennis ,

Título:

The Ring Release Button/lock tab broke.

Texto:

There is a lensCan I replace the ring release button onbutton? The inner tab (which locks the camera body that when pushedadded converter in it allows me to removeplace) is broke off. Well, just half of the lens ring and add a converter. This tiny hook shaped tab holdsis missing. I still have all but the very tip that engages the folded lipflange of the converter in place. Withoutthus locking it locking, my converter w/ wide angle lens loosen.into place. Can anybody think of something that I must usecan do to remedy my 8'problem? This camera pole with a locking camera mount. Is there a chance of replacing the complete mechanism? [image|1384370is so underrated. [image|1414802]
There is a lensCan I replace the ring release button onbutton? The inner tab (which locks the camera body that when pushedadded converter in it allows me to removeplace) is broke off. Well, just half of the lens ring and add a converter. This tiny hook shaped tab holdsis missing. I still have all but the very tip that engages the folded lipflange of the converter in place. Withoutthus locking it locking, my converter w/ wide angle lens loosen.into place. Can anybody think of something that I must usecan do to remedy my 8'problem? This camera pole with a locking camera mount. Is there a chance of replacing the complete mechanism? [image|1384370is so underrated. [image|1414802]

Dispositivo:

Canon PowerShot A590 IS

Estatus:

open

Editado por: Jae Ennis ,

Título:

The Ring Release Button/lock tab broke.

Texto:

The little plastic tab that holds the converter in place has broken off. I am not speaking about theThere is a lens release button on the outsidecamera body that you pushwhen pushed in it allows me to unlockremove the lens ring and add a converter. This tiny hook shaped tab holds the folded lip of the ring. The converter loosens while not being locked in position. I use aplace. Without it locking, my converter w/ wide angle lens & anloosen. I must use my 8' camera pole while taking pictures of clients roofs. Though I usewith a locking quick release, the converter & lens can't be tethered, so I am always worried & checking the convertercamera mount. Is there anya chance of replacing the tab or the complete complete mechanism? [image|1384370]
The little plastic tab that holds the converter in place has broken off. I am not speaking about theThere is a lens release button on the outsidecamera body that you pushwhen pushed in it allows me to unlockremove the lens ring and add a converter. This tiny hook shaped tab holds the folded lip of the ring. The converter loosens while not being locked in position. I use aplace. Without it locking, my converter w/ wide angle lens & anloosen. I must use my 8' camera pole while taking pictures of clients roofs. Though I usewith a locking quick release, the converter & lens can't be tethered, so I am always worried & checking the convertercamera mount. Is there anya chance of replacing the tab or the complete complete mechanism? [image|1384370]

Dispositivo:

Canon PowerShot A590 IS

Estatus:

open

Aporte original por: Jae Ennis ,

Título:

The Ring Release Button/lock tab broke.

Texto:

The little plastic tab that holds the converter in place has broken off. I am not speaking about the button on the outside that you push to unlock the ring. The converter loosens while not being locked in position. I use a wide angle lens & an 8' camera pole  while taking pictures of clients roofs. Though I use a locking quick release, the converter & lens can't be tethered, so I am always worried & checking the converter. Is there any chance of replacing the tab or the complete mechanism?

Dispositivo:

Canon PowerShot A590 IS

Estatus:

open