Saltar al contenido principal
Ayuda

Versión actual por: George McMahon ,

Título:

Digitizer Plug on Logic Board

Texto:

Hi Guys,

I have an Apple iPad Mini 1st Gen Model# A1432 here which needed the Digitizer replaced. The plug that the Ribbon Cable clips into on the Logic Board is missing some of the Gold Pins and as a result the Digitizer isn't working. I am not sure what this item is actually called. I was just wanting to know if anyone could help with the of that part and or if it is available to purchase. I will also need to Purchase a new LCD Screen at the same time as when I turned it on it's coming up with 2 apple logo's and lines across the screen. Any help would be greatly appreciated.  See picture attached the part I need is circled. Thank you in advance.

[image|1327865]

Regards,

George McMahon.

Dispositivo:

iPad Mini GSM

Estatus:

open

Respuesta Aceptada:

458895

Editado por: George McMahon ,

Título:

Digitizer Plug on Logic Board

Texto:

Hi Guys,

I have an Apple iPad Mini 1st Gen Model# A1432 here which needed the Digitizer replaced. The plug that the Ribbon Cable clips into on the Logic Board is missing some of the Gold Pins and as a result the Digitizer isn't working. I am not sure what this item is actually called. I was just wanting to know if anyone could help with the of that part and or if it is available to purchase. I will also need to Purchase a new LCD Screen at the same time as when I turned it on it's coming up with 2 apple logo's and lines across the screen. Any help would be greatly appreciated.  See picture attached the part I need is circled. Thank you in advance.

[image|1327865]

Regards,

George McMahon.

Dispositivo:

iPad Mini GSM

Estatus:

open

Respuesta Aceptada:

458928

Editado por: George McMahon ,

Título:

Digitizer Plug on Logic Board

Texto:

Hi Guys,

I have an Apple iPad Mini 1st Gen Model# A1432 here which needed the Digitizer replaced. The plug that the Ribbon Cable clips into on the Logic Board is missing some of the Gold Pins and as a result the Digitizer isn't working. I am not sure what this item is actually called. I was just wanting to know if anyone could help with the of that part and or if it is available to purchase. I will also need to Purchase a new LCD Screen at the same time as when I turned it on it's coming up with 2 apple logo's and lines across the screen. Any help would be greatly appreciated.  See picture attached the part I need is circled. Thank you in advance.

[image|1327865]

Regards,

George McMahon.

Dispositivo:

iPad Mini GSM

Estatus:

open

Respuesta Aceptada:

458928

Aporte original por: George McMahon ,

Título:

Digitizer Plug on Logic Board

Texto:

Hi Guys,

I have an Apple iPad Mini 1st Gen Model# A1432 here which needed the Digitizer replaced. The plug that the Ribbon Cable clips into on the Logic Board is missing some of the Gold Pins and as a result the Digitizer isn't working. I am not sure what this item is actually called. I was just wanting to know if anyone could help with the of that part and or if it is available to purchase. I will also need to Purchase a new LCD Screen at the same time as when I turned it on it's coming up with 2 apple logo's and lines across the screen. Any help would be greatly appreciated.  See picture attached the part I need is circled. Thank you in advance.

[image|1327865]

Regards,

George McMahon.

Dispositivo:

iPad Mini GSM

Estatus:

open