Skip to main content
Help

Original post by: Steve Parkhurst ,

Text:

I have had this problem several times on the same phone, I let it sit for 2-3 days with the logic board out of the phone.  I found on my last install when my customers power switch would not work properly:

1.  Disconnect the #4 cable and tilt the motherboard up so it does not contact the battery.

2.  Connect all the connectors for the face.

3.  set the motherboard down on the battery.

4.  Connect the #4 cable and the LCD worked properly.

Shut down the phone properly and reinstall the motherboard screws

Good luck

Estado:

open