Saltar al contenido principal
Ayuda

Versión actual por: musofoto ,

Texto:

If the wires are the really thin type as mentioned aboveabove (e.g. they are coloured green, gold or red, with no apparent insulation, it means each strand is insulated) , you'll also need to burn back the insulation from the wires with a lighter. Otherwise the wire won't tin properly and be a nightmare to solder to the connector.

If the wires are the really thin type as mentioned aboveabove (e.g. they are coloured green, gold or red, with no apparent insulation, it means each strand is insulated) , you'll also need to burn back the insulation from the wires with a lighter. Otherwise the wire won't tin properly and be a nightmare to solder to the connector.

Estatus:

open

Aporte original por: musofoto ,

Texto:

If the wires are the really thin type as mentioned above, you'll also need to burn back the insulation from the wires with a lighter. Otherwise the wire won't tin properly and be a nightmare to solder to the connector. 

Estatus:

open