Saltar al contenido principal
Ayuda

Original post by: Michael ,

Texto:

@djdannyrock is most likely correct then. If you have "Some" backlight, it is probably the coil as shown in pic. But if you are needing to flash a light on the screen to see anything, then I would start by checking continuity on the Filter first. If there isn't continuity, it needs changed. If there is continuity, check the caps shown in red (3 in a row) if good, then purchase the Backlight repair kit and change the IC, Diode, Coil and Filter all at once. IC and diode are also pictured with red.

[image|1198755]

Estado:

open