Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Ayuda

Versión actual por: pollytintop ,

Texto:

It dawned on me that some of the proximity sensor parts are not installed. Was the glass broken before the conversion took place?
 
If you look REALLY closely at the proximity sensor, you should see a VERY small black square around it. It pops off and you'll see it is actually attached to a very small piece of colored glass. If this is missing, the proximity sensor will not function correctly. Most likely because it will pickup reflect light from the LCD.
 
Hope this helps. iPhonAid.com
Hope this helps. iPhonAid.com

Estatus:

open

Aporte original por: John Boothman ,

Texto:

It dawned on me that some of the proximity sensor parts are not installed. Was the glass broken before the conversion took place?

If you look REALLY closely at the proximity sensor, you should see a VERY small black square around it. It pops off and you'll see it is actually attached to a very small piece of colored glass. If this is missing, the proximity sensor will not function correctly. Most likely because it will pickup reflect light from the LCD.

Hope this helps. iPhonAid.com

Estatus:

open