Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Versión actual por: oldturkey03 ,

Texto:

@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. You need the wiring diagram for that. I got this from the manual
 
[image|1178359]
 
Now you need to figure out on the board view which point is what. Going back to your image and checking the layout and schematic it appears that connecting a switch the way as pointed out in my pictures should work.
[image|1178370][image|1178368][image|1178371]
[image|1178370]

[image|1178368]

[image|1178371]
always double check with a meter to make sure that you do not close any power to ground circuit.
[image|1178370][image|1178368][image|1178371]
[image|1178370]

[image|1178368]

[image|1178371]
always double check with a meter to make sure that you do not close any power to ground circuit.

Estatus:

open

Editado por: oldturkey03 ,

Texto:

@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. You need the wiring diagram for that. I got this from the manual
 
[image|1178359]
 
Now you need to figure out on the board view which point is what. Going back to your image and checking the layout and schematic it appears that connecting a switch the way as pointed out in my pictures should work.
[image|1178370][image|1178368][image|1178371]
Now you need to figure out on the board view which point is what. Going back to your image and checking the layout and schematic it appears that connecting a switch the way as pointed out in my pictures should work.
[image|1178370][image|1178368][image|1178371]

Estatus:

open

Editado por: oldturkey03 ,

Texto:

@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. youYou need the wiring diagramdiagram for that. I got this from the manual
@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. youYou need the wiring diagramdiagram for that. I got this from the manual
 
[image|1178359]
 
Now you need to figure out on the board view which point is what.

Estatus:

open

Aporte original por: oldturkey03 ,

Texto:

@prokrastinator what you posted is not a schematic but a board layout view. It will not tell you how to connect a switch. you need the wiring diagram. I got this from the manual

[image|1178359]

Now you need to figure out on the board view which point is what.

Estatus:

open