Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Versión actual por: Dan ,

Texto:

Here's a copy of the IFIXIT guide image of the power button:
 
[image|1054485]
 
While hard to see here I do believe the two pads just left and right of the wires exit point are the same connections. It's been awhile since I've worked in this series so I could be wrong here.
 
See if you can solder on a few leads so you can test it out once you have the system re-assembled see if shorting the leads works. If it does you might be able to tack the connector leads to the wires (keeping the connector working).

Estatus:

open

Aporte original por: Dan ,

Texto:

Here's a copy of the IFIXIT guide image of the power button:

[image|1054485]

While hard to see here I do believe the two pads just left and right of the wires exit point are the same connections. It's been awhile since I've worked in this series so I could be wrong here.

Estatus:

open