Saltar al contenido principal
Ayuda

Versión actual por: KURT C ,

Texto:

Try opening it, and fill it with rice to completely dry it. After 24 hours, take the rice out and look at a teardown to see if your device is wired improperly.
== Update 2/2/17 ==
+
Actually not rice just dry it with a hair dryer but DO NOT microwave as that is dumb and stupid.
+
+== Update 3/2/17 ==
+Apperantly rice isnt the way to go, use Isopho whatever alcohol to clean the inside and remove corrosion.

Estatus:

open

Editado por: KURT C ,

Texto:

Try opening it, and fill it with rice to completely dry it. After 24 hours, take the rice out and look at a teardown to see if your device is wired improperly.
+
+== Update 2/2/17 ==
+Actually not rice just dry it with a hair dryer but DO NOT microwave as that is dumb and stupid.

Estatus:

open

Aporte original por: KURT C ,

Texto:

Try opening it, and fill it with rice to completely dry it. After 24 hours, take the rice out and look at a teardown to see if your device is wired improperly.

Estatus:

open