Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Versión actual por: oldturkey03 (detalles del voto) ,

Título:

Digitizer connectors broken, solder pads on board damaged

Texto:

When replacing the digitizer, the connectors came apart. I had a gentleman in Kentucky check it and he planned on placing jumper wires from the test points to the connectors.

The repair was only partly successful. Some of the wires are broken. I don't know if it was in shipping or what, and its irrelevant to me. I am an experienced Electronics repair technician but am a bit out of practice, especially with micro soldering.

I would like to give it a go, but I need a diagram showing which test points connect to which pins on the connectors.

I have the schematics, a good work bench, some dated but very functional equipment, and would love to try.

Can you help?

Dispositivo:

iPad 2 Wi-Fi EMC 2560

Estatus:

open

Respuesta Aceptada:

365043

Editado por: Brad Thurston ,

Título:

Digitizer connectors broken, solder pads on board damaged

Texto:

When replacing the digitizer, the connectors came apart. I had a gentleman in Kentucky check it and he planned on placing jumper wires from the test points to the connectors.

The repair was only partly successful. Some of the wires are broken. I don't know if it was in shipping or what, and its irrelevant to me. I am an experienced Electronics repair technician but am a bit out of practice, especially with micro soldering.

I would like to give it a go, but I need a diagram showing which test points connect to which pins on the connectors.

I have the schematics, a good work bench, some dated but very functional equipment, and would love to try.

Can you help?

Dispositivo:

iPad 2 Wi-Fi EMC 2560

Estatus:

open

Respuesta Aceptada:

365043

Editado por: Brad Thurston ,

Título:

Digitizer connectors broken, solder pads on board damaged

Texto:

When replacing the digitizer, the connectors came apart. I had a gentleman in Kentucky check it and he planned on placing jumper wires from the test points to the connectors.

The repair was only partly successful. Some of the wires are broken. I don't know if it was in shipping or what, and its irrelevant to me. I am an experienced Electronics repair technician but am a bit out of practice, especially with micro soldering.

I would like to give it a go, but I need a diagram showing which test points connect to which pins on the connectors.

I have the schematics, a good work bench, some dated but very functional equipment, and would love to try.

Can you help?

Dispositivo:

iPad 2 Wi-Fi EMC 2560

Estatus:

open

Respuesta Aceptada:

365043

Editado por: Brad Thurston ,

Título:

Digitizer connectors broken, solder pads on board damaged

Texto:

When replacing the digitizer, the connectors came apart. I had a gentleman in Kentucky check it and he planned on placing jumper wires from the test points to the connectors.

The repair was only partly successful. Some of the wires are broken. I don't know if it was in shipping or what, and its irrelevant to me. I am an experienced Electronics repair technician but am a bit out of practice, especially with micro soldering.

I would like to give it a go, but I need a diagram showing which test points connect to which pins on the connectors.

I have the schematics, a good work bench, some dated but very functional equipment, and would love to try.

Can you help?

Dispositivo:

iPad 2 Wi-Fi EMC 2560

Estatus:

open

Respuesta Aceptada:

365402

Editado por: Brad Thurston ,

Título:

Digitizer connectors broken, solder pads on board damaged

Texto:

When replacing the digitizer, the connectors came apart. I had a gentleman in Kentucky check it and he planned on placing jumper wires from the test points to the connectors.

The repair was only partly successful. Some of the wires are broken. I don't know if it was in shipping or what, and its irrelevant to me. I am an experienced Electronics repair technician but am a bit out of practice, especially with micro soldering.

I would like to give it a go, but I need a diagram showing which test points connect to which pins on the connectors.

I have the schematics, a good work bench, some dated but very functional equipment, and would love to try.

Can you help?

Dispositivo:

iPad 2 Wi-Fi EMC 2560

Estatus:

open

Respuesta Aceptada:

365402

Aporte original por: Brad Thurston ,

Título:

Digitizer connectors broken, solder pads on board damaged

Texto:

When replacing the digitizer, the connectors came apart. I had a gentleman in Kentucky check it and he planned on placing jumper wires from the test points to the connectors.

The repair was only partly successful. Some of the wires are broken. I don't know if it was in shipping or what, and its irrelevant to me. I am an experienced Electronics repair technician but am a bit out of practice, especially with micro soldering.

I would like to give it a go, but I need a diagram showing which test points connect to which pins on the connectors.

I have the schematics, a good work bench, some dated but very functional equipment, and would love to try.

Can you help?

Dispositivo:

iPad 2 Wi-Fi EMC 2560

Estatus:

open