Saltar al contenido principal
Ayuda

Versión actual por: Jayvon Saunders ,

Texto:

-Everyone's right except I have done this repair and replaced glass only...while it wasn't the easiest thing I heated it up and used a super thin metal wire and fishing line to separate the glass from the glue then I used one of these[https://www.google.com/aclk?sa=L&ai=DChcSEwjEsICvyIrPAhXsne0KHWzQDJUYABAH&sig=AOD64_3JR6T5yb-7NzboYxlZ4iOulrZ1Cg&ctype=5&q=&ved=0ahUKEwjwlfuuyIrPAhULez4KHSSYDQ8Q2CkI2wUwAw&adurl=|Here]= to line the new glass up the apply LOCA UV glue which has to be cured by uv light but once cured your ready to install
+Everyone's right except I have done this repair and replaced glass only...while it wasn't the easiest thing I heated it up and used a super thin metal wire and fishing line to separate the glass from the glue then I used one of these[https://www.google.com/aclk?sa=L&ai=DChcSEwjEsICvyIrPAhXsne0KHWzQDJUYABAH&sig=AOD64_3JR6T5yb-7NzboYxlZ4iOulrZ1Cg&ctype=5&q=&ved=0ahUKEwjwlfuuyIrPAhULez4KHSSYDQ8Q2CkI2wUwAw&adurl=|Here]= to line the new glass up the apply LOCA UV glue which has to be cured by uv light but once cured your ready to install So THERE IS NO NEED FOR $5000 IN EQUIPMENT

Estatus:

open

Aporte original por: Jayvon Saunders ,

Texto:

Everyone's right except I have done this repair and replaced glass only...while it wasn't the easiest thing I heated it up and used a super thin metal  wire and fishing line to separate the glass from the glue then I used one of these[https://www.google.com/aclk?sa=L&ai=DChcSEwjEsICvyIrPAhXsne0KHWzQDJUYABAH&sig=AOD64_3JR6T5yb-7NzboYxlZ4iOulrZ1Cg&ctype=5&q=&ved=0ahUKEwjwlfuuyIrPAhULez4KHSSYDQ8Q2CkI2wUwAw&adurl=|Here]= to line the new glass up the apply LOCA UV glue which has to be cured by uv light but once cured your ready to install

Estatus:

open