Saltar al contenido principal
Ayuda

Aporte original por: aricwehmeyer ,

Texto:

Remove the battery

Remove the 2 screws located under the battery

Carefully, remove the clear plastic cover

Remove the 2 screws under the cover

Separate the blue and white housing pieces, exposing the antenna wire

Very carefully strip 0.54" of the insulation, exposing the wire mesh

Very carefully push the mesh towards end still attached to the monitor

This should create a bump making it possible to trim away the mesh without damaging the inner wire

Reassemble and test.

There is some math involved which will prevent this from working on anything other than a 5.4ghz antenna

Estatus:

open