Saltar al contenido principal
Ayuda

Versión actual por: Ben ,

Texto:

If you don't have the 4 screws to hold in the Digitizer, LCD, front camera plugs in firmly then that may be your issue. These screws go on top of the metal place above the logic board.
 
Also if they don't click in when you plug in the display cables, you may need to straighten out the plug. You can do this with your hands and this will help make better contact with the flex cable plug pins.

Estatus:

open

Aporte original por: Ben ,

Texto:

If you don't have the 4 screws to hold in the Digitizer, LCD, front camera plugs in firmly then that may be your issue. These screws go on top of the metal place above the logic board.

Estatus:

open