Saltar al contenido principal
Ayuda

Versión actual por: RG ,

Texto:

-Position the ribbon cable onto the conector and then use Use white tak...its like blue tak but kind of sets harder!...to keep the cable pressed down.
+Position the ribbon cable onto the conector and then use white tak...its like blue tak but kind of sets harder!...to keep the cable pressed down.
This worked for my one!
You might have to try a couple of times before you get it to work!
Take a look at my YouTube video...
https://m.youtube.com/watch?v=mNbxeLlpaOg
http://www.amazon.co.uk/WHITE-TACK-BLUE-REUSEABLE-REMOVEABLE/dp/B007K7TEJ4

Estatus:

open

Editado por: RG ,

Texto:

Position the ribbon cable onto the conector and then use Use white tak...its like blue tak but kind of sets harder!...to keep the cable pressed down.
This worked for my one!
You might have to try a couple of times before you get it to work!
-I'll be doing a YouTube video on this at some point
+Take a look at my YouTube video...
+
+https://m.youtube.com/watch?v=mNbxeLlpaOg
http://www.amazon.co.uk/WHITE-TACK-BLUE-REUSEABLE-REMOVEABLE/dp/B007K7TEJ4

Estatus:

open

Editado por: RG ,

Texto:

Position the ribbon cable onto the conector and then use Use white tak...its like blue tak but kind of sets harder!...to keep the cable pressed down.
This worked for my one!
-You might have to try a couple of times before you get it exact.
+You might have to try a couple of times before you get it to work!
+
+I'll be doing a YouTube video on this at some point
+
+http://www.amazon.co.uk/WHITE-TACK-BLUE-REUSEABLE-REMOVEABLE/dp/B007K7TEJ4

Estatus:

open

Aporte original por: RG ,

Texto:

Position the ribbon cable onto the conector and then use Use white tak...its  like blue tak but kind of sets harder!...to keep the cable pressed down.

This worked for my one!

You might have to try a couple of times before you get it exact.

Estatus:

open