Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Ayuda

Versión actual por: Katherine Simmons ,

Texto:

It is the indicator for the screwdriver to be in either auto mode where the motor in the drill activates to spin the hex bit, or in manual mode is when you use the screwdriver as if it were a traditional handheld screwdriver(without the motor, spinning with your hand.) manual mode could be used if the screwdriver is running low on battery life and you don't have a screwdriver on hand. Take a look at the [https://www.ifixit.com/Wiki/Black_and_Decker_LI2000_Troubleshooting|troubleshooting page] for the LI2000.
It is the indicator for the screwdriver to be in either auto mode where the motor in the drill activates to spin the hex bit, or in manual mode is when you use the screwdriver as if it were a traditional handheld screwdriver(without the motor, spinning with your hand.) manual mode could be used if the screwdriver is running low on battery life and you don't have a screwdriver on hand. Take a look at the [https://www.ifixit.com/Wiki/Black_and_Decker_LI2000_Troubleshooting|troubleshooting page] for the LI2000.

Estatus:

open

Aporte original por: Katherine Simmons ,

Texto:

It is the indicator for the screwdriver to be in either auto mode where the motor in the drill activates to spin the hex bit, or in manual mode is when you use the screwdriver as if it were a traditional handheld screwdriver(without the motor, spinning with your hand.) manual mode could be used if the screwdriver is running low on battery life and you don't have a screwdriver on hand.

Estatus:

open