Saltar al contenido principal
Ayuda

Aporte original por: Matt Rausch ,

Texto:

Hi Ray,

I don't own a drone of this type, however I have repaired stripped out plastic screw holes in my time!  For my recommendation, I'm assuming that the screw holes on the drone are the ones that are stripped and cannot be tightened up.

To repair the holes to make sure you can still replace the legs and keep that functionality, I would recommend trying a process similar to [https://www.youtube.com/watch?v=iqRsLGa8w0w|this YouTube video].  He uses the original screws, covers them in Teflon tape, fills the stripped hole with a plastics epoxy, and while the glue is wet, puts the screw in to essentially mold a screw hole.  You let the epoxy dry while the Teflon-tape wrapped screw is in the hole, then take the screw out with a driver and you should be good to go.

Estatus:

open