Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Ayuda

Versión actual por: Andrew W. ,

Título:

How reconnect display date cable?

Texto:

When reconnecting the display data cable to the logic board on an EMC 2428, is there a trick to lining it up correctly? I assume that the connection is made by inserting the male cable to the female socket on the logic board by sliding it towards the top of the machine (the reverse of the disconnection), yes?. But I cannot get it to seat in the socket. I would hate to damage it.

Dispositivo:

InteliMac Intel 21.5" EMC 2428
InteliMac Intel 21.5" EMC 2428

Estatus:

open

Aporte original por: dickson ,

Título:

How reconnect display date cable?

Texto:

When reconnecting the display data cable to the logic board on an EMC 2428, is there a trick to lining it up correctly? I assume that the connection is made by inserting the male cable to the female socket on the logic board by sliding it towards the top of the machine (the reverse of the disconnection), yes?. But I cannot get it to seat in the socket. I would hate to damage it.

Dispositivo:

Intel EMC 2428

Estatus:

open