Purcell Hamilton, first you want to make sure that you get the refrigerant removed from the AC.
Remove the drive belt
[image|621506]
Loosen the bolt securing the drive belt.
Loosen the adjusting bolt and remove the drive belt.
[image|621507]
Remove the compressor.
Disconnect the electrical connector from the compressor.
Remove the two bolts holding the liquid line and discharge line to the compressor.
Disconnect the lines from the compressor by pulling them out.
Remove the four bolts holding the compressor to the engine/support bracket.
-
The compressor can now be removed.
-
Install in reverse order. Remove that you will need to have the right amount of compressor oil added to the compressor and that you need a vacuum pump on the lines to make sure that all humidity etc. is removed.
+
The compressor can now be removed.
+
+
Install in reverse order. Remove that you will need to have the right amount of compressor oil added to the compressor and that you need a vacuum pump on the lines to make sure that all humidity etc. is removed.
+
Decent video [https://www.youtube.com/watch?v=APNmRtr6YfU|right here] should help.
Purcell Hamilton, first you want to make sure that you get the refrigerant removed from the AC.
Remove the drive belt
[image|621506]
Loosen the bolt securing the drive belt.
Loosen the adjusting bolt and remove the drive belt.
[image|621507]
Remove the compressor.
Disconnect the electrical connector from the compressor.
Remove the two bolts holding the liquid line and discharge line to the compressor.
Disconnect the lines from the compressor by pulling them out.
Remove the four bolts holding the compressor to the engine/support bracket.
-
The compressor can now be removed.
+
The compressor can now be removed.
+
Install in reverse order. Remove that you will need to have the right amount of compressor oil added to the compressor and that you need a vacuum pump on the lines to make sure that all humidity etc. is removed.
Purcell Hamilton, first you want to make sure that you get the refrigerant removed from the AC.
Remove the drive belt
[image|621506]
Loosen the bolt securing the drive belt.
Loosen the adjusting bolt and remove the drive belt.
[image|621507]
Remove the compressor.
Disconnect the electrical connector from the compressor.
Remove the two bolts holding the liquid line and discharge line to the compressor.
Disconnect the lines from the compressor by pulling them out.
Remove the four bolts holding the compressor to the engine/support bracket.
The compressor can now be removed.