Saltar al contenido principal
Ayuda

Aporte original por: Dennis Regondola ,

Texto:

i have also the same problem with this, but when i attached my PB G4 15" from my other mac through Target mode the line doesn't appear on the other mac. Which means the problem would be the LCD Display. On the other hand i used the NVRam & PRAM procedure and the LCD Lines just like an equal sign vertically. it appears okay then after a week the lines came back then i tried the PRAM & NVRAM Procedure but still there's these lines on my PB G4 LCD.

What d'yo think, i should replace my LCD now or i should proceed again to PRAM & NVRAM before i replace my LCD?

Hope i could get some other options.

Thanks!

Estatus:

open