Saltar al contenido principal
Ayuda

Versión actual por: Majesty ,

Texto:

-I'm pretty sure there's a way to "jump" it and get it to power up, but im not familiar with the technique. As far as how the keyboard communicates with the LB, it through the ribbon cable that goes from the trackpad to the logic board.
+I'm pretty sure there's a way to "jump" it and get it to power up, but im not familiar with the technique. As far as how the keyboard communicates with the LB, it through the ribbon cable that goes from the trackpad to the logic board. This [guide|515|guide] shows the removal of the topcase and the ribbon in question. When I was working on this machine I would connect the topcase, power the machine on, then remove the connection and topcase. Not sure if this particular model can be "jumped" without the topcase.

Estatus:

open

Aporte original por: Majesty ,

Texto:

I'm pretty sure there's a way to "jump" it and get it to power up, but im not familiar with the technique.  As far as how the keyboard communicates with the LB, it through the ribbon cable that goes from the trackpad to the logic board.

Estatus:

open