Saltar al contenido principal
Ayuda

Versión actual por: markus weiher ,

Texto:

The moto q is charged via the usb port, the port could normally repaired - but that involves soldering
 
you wrote that it works when you hold it in a certain angle - sounds ok - but it isn't!
 
the more you bent it, the more damage could be done
 
is used a picture from the teardown to show you this:
 
[image|57676|size=thumbnail]
 
to fix it, you have to resolder the broken parts - and it would be a good idea to check the 5 usb contacts to the main board - they break if they were bent to often
 
if the picture is to small, use the [http://s1.guide-images.ifixit.net/igi/XttMDV5dOBYKEWYZ.huge|huge]onehttp://s1.guide-images.ifixit.net/igi/XttMDV5dOBYKEWYZ.huge|huge] one
if the picture is to small, use the [http://s1.guide-images.ifixit.net/igi/XttMDV5dOBYKEWYZ.huge|huge]onehttp://s1.guide-images.ifixit.net/igi/XttMDV5dOBYKEWYZ.huge|huge] one

Estatus:

open

Aporte original por: markus weiher ,

Texto:

The moto q is charged via the usb port, the port could normally repaired - but that involves soldering

you wrote that it works when you hold it in a certain angle - sounds ok - but it isn't!

the more you bent it, the more damage could be done

is used a picture from the teardown to show you this:

[image|57676|size=thumbnail]

to fix it, you have to resolder the broken parts - and it would be a good idea to check the 5 usb contacts to the main board - they break if they were bent to often

if the picture is to small, use the [http://s1.guide-images.ifixit.net/igi/XttMDV5dOBYKEWYZ.huge|huge]one

Estatus:

open