Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Ayuda

Aporte original por: Richard tran ,

Título:

LCD burnt issue after digitizer swap

Texto:

So long story short. On my iPad air I had swapped the Digitizer and when I was putting the LCD back into the logic board it was working but due to the design it kept popping out. Upon a few tries I finally got the screws in for the LCD and digitizer flex but now the screen won't come on even after multiple soft reboots. Upon further inspection, the lcds flex connector seems to be burnt on the connection. My question is will a new LCD remedy this issue despite the board being slightly charred as well. Thank you guys.

Dispositivo:

iPad Air

Estatus:

open