Saltar al contenido principal
Ayuda

Versión actual por: Tom Shabangu ,

Texto:

I have tried a few things none have worked came close as I could see the ir on camera aswell as without. Only have the Sharpy method left I got a feeling this one will work. My light sensor works too so my screen changes brightness automatically.
+
+--UPDATE--
+
+Sucess my light approximity finally works. So the tape didn't work for me I though of using some foam because I wanted it like the original. Foam did work but I had to place it in the middle of the two sensors.A vertical strip note it has to touch the front of the screen or it won't work so make sure the foam is bigger then any old one there. I'm shocked it worked for me as I have a 4s screen on an iphone 4 I got of ebay.yeh I had to change the bazel front. For more info see link.
+
+
+http://www.ifixit.com/Answers/View/53075/Is+the+iPhone+4+proximity+sensor+issue+solved+by+replacing+the+sensor

Estatus:

open

Aporte original por: Tom Shabangu ,

Texto:

I have tried a few things none have worked came close as I could see the ir on camera aswell as without. Only have the Sharpy method left I got a feeling this one will work. My light sensor works too so my screen changes brightness automatically.

Estatus:

open