Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Ayuda

Aporte original por: Brian Wood ,

Texto:

I know this thread is kind of old, but I deal directly with a supplier in the states and I've asked him what the problem was with his screens recently.  He supplies great screens and I've rarely had any issues, but as of late I get about 50% with the flickering back light.  This issue doesnt start until about 20 min after install.  He told me the issue was that the glass on top of the digitizer is either too thick or too thin.  Its an issue with the manufacturing process.  Basically, whether its too thick or too thin causes undue pressure on the back light.  Too much glue or thick glass, if that makes sense.

Hope this helps.

Estatus:

open