Saltar al contenido principal
Ayuda

Versión actual por: Alexander ,

Título:

Touch not working after Digitizer replacement?

Texto:

Hello every one!

I'm a newly started technician and I absolutely hate ipads. I always end up with problems from them!

Anyways, I replaced the broken digitizer with a new one and every thing seemed great. When I went to test that everything was working (I haven't removed the strips over the tape and actually mounted the digitizer) it started up fine.

However, when I get to the lock(unlock) bar I couldn't continue. The touch isn't working.

Home button works fine, if I put the Ipad to sleep I can wake it up with the home button.

/EDIT: I just tried with another digitizer, same problem. Home button works, touch does not.

Is the spacing between the golden 'prongs'(what is the correct technical term for them?) supposed to be there?

Link to picture: http://postimg.org/image/w39icrorj/

Thanks for any and all tips!

Dispositivo:

iPad Mini Wi-Fi

Estatus:

open

Respuesta Aceptada:

166419

Editado por: Alexander ,

Título:

Touch not working after Digitizer replacement?

Texto:

Hello every one!

I'm a newly started technician and I absolutely hate ipads. I always end up with problems from them!

Anyways, I replaced the broken digitizer with a new one and every thing seemed great. When I went to test that everything was working (I haven't removed the strips over the tape and actually mounted the digitizer) it started up fine.

However, when I get to the lock(unlock) bar I couldn't continue. The touch isn't working.

Home button works fine, if I put the Ipad to sleep I can wake it up with the home button.

/EDIT: I just tried with another digitizer, same problem. Home button works, touch does not.

Is the spacing between the golden 'prongs'(what is the correct technical term for them?) supposed to be there?

Link to picture: http://postimg.org/image/w39icrorj/

Thanks for any and all tips!

Dispositivo:

iPad Mini Wi-Fi

Estatus:

open

Respuesta Aceptada:

166413

Editado por: Alexander ,

Título:

Touch not working after Digitizer replacement?

Texto:

Hello every one!
 
I'm a newly started technician and I absolutely hate ipads. I always end up with problems from them!
 
Anyways, I replaced the broken digitizer with a new one and every thing seemed great. When I went to test that everything was working (I haven't removed the strips over the tape and actually mounted the digitizer) it started up fine.
 
However, when I get to the lock(unlock) bar I couldn't continue. The touch isn't working.
 
Home button works fine, if I put the Ipad to sleep I can wake it up with the home button.
 
/EDIT: I just tried with another digitizer, same problem. Home button works, touch does not.
 
Is the spacing between the golden 'prongs'(what is the correct technical term for them?) supposed to be there?
Is the spacing between the golden 'prongs'(what is the correct technical term for them?) supposed to be there?
 
Link to picture: http://postimg.org/image/w39icrorj/
 
 
Thanks for any and all tips!

Dispositivo:

iPad Mini Wi-Fi

Estatus:

open

Respuesta Aceptada:

166413

Editado por: Alexander ,

Título:

Touch not working after Digitizer replacement?

Texto:

Hello every one!
 
I'm a newly started technician and I absolutely hate ipads. I always end up with problems from them!
 
Anyways, I replaced the broken digitizer with a new one and every thing seemed great. When I went to test that everything was working (I haven't removed the strips over the tape and actually mounted the digitizer) it started up fine.
 
However, when I get to the lock(unlock) bar I couldn't continue. The touch isn't working.
 
Home button works fine, if I put the Ipad to sleep I can wake it up with the home button.
 
/EDIT: I just tried with another digitizer, same problem. Home button works, touch does not.
 
Is the spacing between the golden 'prongs'(what is the correct technical term for them?) supposed to be there?
 
Link to picture: http://postimg.org/image/w39icrorj/
 
 
Thanks for any and all tips!

Dispositivo:

iPad Mini Wi-Fi

Estatus:

open

Editado por: Alexander ,

Título:

Touch not working after Digitizer replacement?

Texto:

Hello every one!
 
I'm a newly started technician and I absolutely hate ipads. I always end up with problems from them!
 
Anyways, I replaced the broken digitizer with a new one and every thing seemed great. When I went to test that everything was working (I haven't removed the strips over the tape and actually mounted the digitizer) it started up fine.
 
However, when I get to the lock(unlock) bar I couldn't continue. The touch isn't working.
 
Home button works fine, if I put the Ipad to sleep I can wake it up with the home button.
/EDIT: I just tried with another digitizer, same problem. Home button works, touch does not.
 
Thanks for any and all tips!

Dispositivo:

iPad Mini Wi-Fi

Estatus:

open

Aporte original por: Alexander ,

Título:

Touch not working after Digitizer replacement?

Texto:

Hello every one!

I'm a newly started technician and I absolutely hate ipads. I always end up with problems from them!

Anyways, I replaced the broken digitizer with a new one and every thing seemed great. When I went to test that everything was working (I haven't removed the strips over the tape and actually mounted the digitizer) it started up fine.

However, when I get to the lock(unlock) bar I couldn't continue. The touch isn't working.

Home button works fine, if I put the Ipad to sleep I can wake it up with the home button.

Thanks for any and all tips!

Dispositivo:

iPad Mini Wi-Fi

Estatus:

open