Saltar al contenido principal
Ayuda

Aporte original por: oldturkey03 ,

Texto:

sara, I would get to the "tummy switch" and check the circuit from there. You do have a couple of choices here. Check the switch, then the speaker. Check the connector for both. You will need a multimeter to check those. Follow the schematic to work on your Furby's voice, and check [http://www.phobe.com/furby/auto1.html|on here] for directions on how to skin the Furby. Hope this helps, good luck.

[image|306343|align=left]

Estatus:

open