Saltar al contenido principal
Ayuda

Versión actual por: mayer (detalles del voto) ,

Título:

Ipad 2 Damaged Digitizer connectors

Texto:

Hi,

I damaged the digitizer connectors during an attempted repair.  Not only did one of the clips break off (I have seen suggestions on this), but I actually pulled the black tape off the top of the connector (I thought the cable popped off like it does on the Itouch), then the pins themselves starting coming off.  I know the connectors can be replaced by soldering but I am hoping there is a work around because the soldering process looks pretty tough.

Any help would be appreciated!

Dispositivo:

iPad 2 Wi-Fi EMC 2560

Estatus:

open

Respuesta Aceptada:

128889

Aporte original por: Lisa Graf ,

Título:

Ipad 2 Damaged Digitizer connectors

Texto:

Hi,

I damaged the digitizer connectors during an attempted repair.  Not only did one of the clips break off (I have seen suggestions on this), but I actually pulled the black tape off the top of the connector (I thought the cable popped off like it does on the Itouch), then the pins themselves starting coming off.  I know the connectors can be replaced by soldering but I am hoping there is a work around because the soldering process looks pretty tough.

Any help would be appreciated!

Dispositivo:

iPad 2 Wi-Fi EMC 2560

Estatus:

open