Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Versión actual por: iRobot ,

Título:

Power button won't work after wifi & screen replacement

Texto:

So I had to replace the screen and during the process I ripped the wifi antenna. I ordered that and put it in no problem. Now before applying the Adhesive Strips I wanted to make sure everything worked. I tired holding the power button and it won't turn on (yes all the ribbon cables are attached). I plugged it into a power supply and it booted and the digitizer seemed to work ok, but not the power button.  To turn it off I had to unscrew the logic board and lift it from the battery packs.  Any ideas?

Dispositivo:

iPad 2 Wi-Fi EMC 2415
iPad 2 Wi-Fi EMC 2415

Estatus:

open

Editado por: iRobot ,

Título:

Power button won't work after wifi & screen replacement

Texto:

So I had to replace the screen and during the process I ripped the wifi antenna. I ordered that and put it in no problem. Now before applying the Adhesive Strips I wanted to make sure everything worked. I tired holding the power button and it won't turn on (yes all the ribbon cables are attached). I plugged it into a power supply and it booted and the digitizer seemed to work ok, but not the power button.  To turn it off I had to unscrew the logic board and lift it from the battery packs.  Any ideas?

Dispositivo:

iPad 2 Wi-Fi

Estatus:

open

Editado por: Walter Galan ,

Título:

Power button won't work after wifi & screen replacement

Texto:

So I had to replace the screen and during the process I ripped the wifi antenna. I ordered that and put it in no problem. Now before applying the Adhesive Strips I wanted to make sure everything worked. I tired holding the power button and it won't turn on (yes all the ribbon cables are attached). I plugged it into a power supply and it booted and the digitizer seemed to work ok, but not the power button.  To turn it off I had to unscrew the logic board and lift it from the battery packs.  Any ideas?

Dispositivo:

iPad 2 Wi-Fi A1395
iPad 2 Wi-Fi A1395

Estatus:

open

Aporte original por: Brian ,

Título:

Power button won't work after wifi & screen replacement

Texto:

So I had to replace the screen and during the process I ripped the wifi antenna. I ordered that and put it in no problem. Now before applying the Adhesive Strips I wanted to make sure everything worked. I tired holding the power button and it won't turn on (yes all the ribbon cables are attached). I plugged it into a power supply and it booted and the digitizer seemed to work ok, but not the power button.  To turn it off I had to unscrew the logic board and lift it from the battery packs.  Any ideas?

Dispositivo:

iPad 2 Wi-Fi A1395

Estatus:

open