Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Ayuda

Versión actual por: Navid km ,

Texto:

Hi guys
 
I have doubts how to connect the backlight cable to the ZIF connector in the LCD converter board.
 
The backlight cable is coming from the lid and the converter board is connected to the LCD.
 
Here is a picture which compares two possible ways to connect the cable to the ZIF connector. As I recall the right pic (no. 2) should be correct but it makes more sense that the left pic (no. 1) is correct. Any idea?
 
[image|227243|align=leftimage|227261]
[image|227243|align=leftimage|227261]

Estatus:

open

Aporte original por: Navid km ,

Texto:

Hi guys

I have doubts how to connect the backlight cable to the ZIF connector in the LCD converter board.

The backlight cable is coming from the lid and the converter board is connected to the LCD.

Here is a picture which compares two possible ways to connect the cable to the ZIF connector. As I recall the right pic (no. 2) should be correct but it makes more sense that the left pic (no. 1) is correct. Any idea?

[image|227243|align=left]

Estatus:

open