Saltar al contenido principal
Ayuda

Versión actual por: Laurian ,

Título:

logic board / display connector L9000 coil charred

Texto:

The small SMD coil (L9000) under the display connector on the logic board is charred.

The display connector was damaged previously (broken shield) and every time I was transporting the iMac I had to either smack it or open it and wiggle the display cable in order to make it work.

This time it might short-circuited one of those pins to the ground (the twisted wobbly shield) and hopefully only that inductance died.

Here is a picture from the crime scene: http://cl.ly/image/222v2L222z1M

I wonder if there are any options to repair it.

Dispositivo:

iMac Intel 27" EMC 2390

Estatus:

open

Respuesta Aceptada:

+119763

Aporte original por: Laurian ,

Título:

logic board / display connector L9000 coil charred

Texto:

The small SMD coil (L9000) under the display connector on the logic board is charred.

The display connector was damaged previously (broken shield) and every time I was transporting the iMac I had to either smack it or open it and wiggle the display cable in order to make it work.

This time it might short-circuited one of those pins to the ground (the twisted wobbly shield) and hopefully only that inductance died.

Here is a picture from the crime scene: http://cl.ly/image/222v2L222z1M

I wonder if there are any options to repair it.

Dispositivo:

iMac Intel 27" EMC 2390

Estatus:

open